Your IP : 172.71.120.4
<?php
/**
* Default values for MediaWiki configuration settings.
*
*
* NEVER EDIT THIS FILE
*
*
* To customize your installation, edit "LocalSettings.php". If you make
* changes here, they will be lost on next upgrade of MediaWiki!
*
* In this file, variables whose default values depend on other
* variables are set to false. The actual default value of these variables
* will only be set in Setup.php, taking into account any custom settings
* performed in LocalSettings.php.
*
* Documentation is in the source and on:
* http://www.mediawiki.org/wiki/Manual:Configuration_settings
*
* @warning Note: this (and other things) will break if the autoloader is not
* enabled. Please include includes/AutoLoader.php before including this file.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
* http://www.gnu.org/copyleft/gpl.html
*
* @file
*/
/**
* @defgroup Globalsettings Global settings
*/
/**
* @cond file_level_code
* This is not a valid entry point, perform no further processing unless
* MEDIAWIKI is defined
*/
if ( !defined( 'MEDIAWIKI' ) ) {
echo "This file is part of MediaWiki and is not a valid entry point\n";
die( 1 );
}
/**
* wgConf hold the site configuration.
* Not used for much in a default install.
* @since 1.5
*/
$wgConf = new SiteConfiguration;
/**
* MediaWiki version number
* @since 1.2
*/
$wgVersion = '1.21.1';
/**
* Name of the site. It must be changed in LocalSettings.php
*/
$wgSitename = 'MediaWiki';
/**
* URL of the server.
*
* @par Example:
* @code
* $wgServer = 'http://example.com';
* @endcode
*
* This is usually detected correctly by MediaWiki. If MediaWiki detects the
* wrong server, it will redirect incorrectly after you save a page. In that
* case, set this variable to fix it.
*
* If you want to use protocol-relative URLs on your wiki, set this to a
* protocol-relative URL like '//example.com' and set $wgCanonicalServer
* to a fully qualified URL.
*/
$wgServer = WebRequest::detectServer();
/**
* Canonical URL of the server, to use in IRC feeds and notification e-mails.
* Must be fully qualified, even if $wgServer is protocol-relative.
*
* Defaults to $wgServer, expanded to a fully qualified http:// URL if needed.
* @since 1.18
*/
$wgCanonicalServer = false;
/************************************************************************//**
* @name Script path settings
* @{
*/
/**
* The path we should point to.
* It might be a virtual path in case with use apache mod_rewrite for example.
*
* This *needs* to be set correctly.
*
* Other paths will be set to defaults based on it unless they are directly
* set in LocalSettings.php
*/
$wgScriptPath = '/wiki';
/**
* Whether to support URLs like index.php/Page_title These often break when PHP
* is set up in CGI mode. PATH_INFO *may* be correct if cgi.fix_pathinfo is set,
* but then again it may not; lighttpd converts incoming path data to lowercase
* on systems with case-insensitive filesystems, and there have been reports of
* problems on Apache as well.
*
* To be safe we'll continue to keep it off by default.
*
* Override this to false if $_SERVER['PATH_INFO'] contains unexpectedly
* incorrect garbage, or to true if it is really correct.
*
* The default $wgArticlePath will be set based on this value at runtime, but if
* you have customized it, having this incorrectly set to true can cause
* redirect loops when "pretty URLs" are used.
* @since 1.2.1
*/
$wgUsePathInfo = ( strpos( PHP_SAPI, 'cgi' ) === false ) &&
( strpos( PHP_SAPI, 'apache2filter' ) === false ) &&
( strpos( PHP_SAPI, 'isapi' ) === false );
/**
* The extension to append to script names by default. This can either be .php
* or .php5.
*
* Some hosting providers use PHP 4 for *.php files, and PHP 5 for *.php5. This
* variable is provided to support those providers.
* @since 1.11
*/
$wgScriptExtension = '.php';
/**@}*/
/************************************************************************//**
* @name URLs and file paths
*
* These various web and file path variables are set to their defaults
* in Setup.php if they are not explicitly set from LocalSettings.php.
*
* These will relatively rarely need to be set manually, unless you are
* splitting style sheets or images outside the main document root.
*
* In this section, a "path" is usually a host-relative URL, i.e. a URL without
* the host part, that starts with a slash. In most cases a full URL is also
* acceptable. A "directory" is a local file path.
*
* In both paths and directories, trailing slashes should not be included.
*
* @{
*/
/**
* The URL path to index.php.
*
* Defaults to "{$wgScriptPath}/index{$wgScriptExtension}".
*/
$wgScript = false;
/**
* The URL path to redirect.php. This is a script that is used by the Nostalgia
* skin.
*
* Defaults to "{$wgScriptPath}/redirect{$wgScriptExtension}".
*/
$wgRedirectScript = false;
/**
* The URL path to load.php.
*
* Defaults to "{$wgScriptPath}/load{$wgScriptExtension}".
* @since 1.17
*/
$wgLoadScript = false;
/**
* The URL path of the skins directory.
* Defaults to "{$wgScriptPath}/skins".
* @since 1.3
*/
$wgStylePath = false;
$wgStyleSheetPath = &$wgStylePath;
/**
* The URL path of the skins directory. Should not point to an external domain.
* Defaults to "{$wgScriptPath}/skins".
* @since 1.17
*/
$wgLocalStylePath = false;
/**
* The URL path of the extensions directory.
* Defaults to "{$wgScriptPath}/extensions".
* @since 1.16
*/
$wgExtensionAssetsPath = false;
/**
* Filesystem stylesheets directory.
* Defaults to "{$IP}/skins".
* @since 1.3
*/
$wgStyleDirectory = false;
/**
* The URL path for primary article page views. This path should contain $1,
* which is replaced by the article title.
*
* Defaults to "{$wgScript}/$1" or "{$wgScript}?title=$1",
* depending on $wgUsePathInfo.
*/
$wgArticlePath = false;
/**
* The URL path for the images directory.
* Defaults to "{$wgScriptPath}/images".
*/
$wgUploadPath = false;
/**
* The filesystem path of the images directory. Defaults to "{$IP}/images".
*/
$wgUploadDirectory = false;
/**
* Directory where the cached page will be saved.
* Defaults to "{$wgUploadDirectory}/cache".
*/
$wgFileCacheDirectory = false;
/**
* The URL path of the wiki logo. The logo size should be 135x135 pixels.
* Defaults to "{$wgStylePath}/common/images/wiki.png".
*/
$wgLogo = false;
/**
* The URL path of the shortcut icon.
* @since 1.6
*/
$wgFavicon = '/favicon.ico';
/**
* The URL path of the icon for iPhone and iPod Touch web app bookmarks.
* Defaults to no icon.
* @since 1.12
*/
$wgAppleTouchIcon = false;
/**
* The local filesystem path to a temporary directory. This is not required to
* be web accessible.
*
* When this setting is set to false, its value will be set through a call
* to wfTempDir(). See that methods implementation for the actual detection
* logic.
*
* Developers should use the global function wfTempDir() instead of this
* variable.
*
* @see wfTempDir()
* @note Default changed to false in MediaWiki 1.20.
*
*/
$wgTmpDirectory = false;
/**
* If set, this URL is added to the start of $wgUploadPath to form a complete
* upload URL.
* @since 1.4
*/
$wgUploadBaseUrl = '';
/**
* To enable remote on-demand scaling, set this to the thumbnail base URL.
* Full thumbnail URL will be like $wgUploadStashScalerBaseUrl/e/e6/Foo.jpg/123px-Foo.jpg
* where 'e6' are the first two characters of the MD5 hash of the file name.
* If $wgUploadStashScalerBaseUrl is set to false, thumbs are rendered locally as needed.
* @since 1.17
*/
$wgUploadStashScalerBaseUrl = false;
/**
* To set 'pretty' URL paths for actions other than
* plain page views, add to this array.
*
* @par Example:
* Set pretty URL for the edit action:
* @code
* 'edit' => "$wgScriptPath/edit/$1"
* @endcode
*
* There must be an appropriate script or rewrite rule in place to handle these
* URLs.
* @since 1.5
*/
$wgActionPaths = array();
/**@}*/
/************************************************************************//**
* @name Files and file uploads
* @{
*/
/** Uploads have to be specially set up to be secure */
$wgEnableUploads = false;
/**
* The maximum age of temporary (incomplete) uploaded files
*/
$wgUploadStashMaxAge = 6 * 3600; // 6 hours
/** Allows to move images and other media files */
$wgAllowImageMoving = true;
/**
* Enable deferred upload tasks that use the job queue.
* Only enable this if job runners are set up for both the
* 'AssembleUploadChunks' and 'PublishStashedFile' job types.
*/
$wgEnableAsyncUploads = false;
/**
* Allow chunked uploads. This should only really be needed if you
* use the UploadWizard extension or allow huge file uploads.
* https://www.mediawiki.org/wiki/API:Upload#Chunked_uploading
*/
$wgAllowChunkedUploads = false;
/**
* These are additional characters that should be replaced with '-' in filenames
*/
$wgIllegalFileChars = ":";
/**
* @deprecated since 1.17 use $wgDeletedDirectory
*/
$wgFileStore = array();
/**
* What directory to place deleted uploads in.
* Defaults to "{$wgUploadDirectory}/deleted".
*/
$wgDeletedDirectory = false;
/**
* Set this to true if you use img_auth and want the user to see details on why access failed.
*/
$wgImgAuthDetails = false;
/**
* If this is enabled, img_auth.php will not allow image access unless the wiki
* is private. This improves security when image uploads are hosted on a
* separate domain.
*/
$wgImgAuthPublicTest = true;
/**
* File repository structures
*
* $wgLocalFileRepo is a single repository structure, and $wgForeignFileRepos is
* an array of such structures. Each repository structure is an associative
* array of properties configuring the repository.
*
* Properties required for all repos:
* - class The class name for the repository. May come from the core or an extension.
* The core repository classes are FileRepo, LocalRepo, ForeignDBRepo.
* FSRepo is also supported for backwards compatibility.
*
* - name A unique name for the repository (but $wgLocalFileRepo should be 'local').
* The name should consist of alpha-numeric characters.
* - backend A file backend name (see $wgFileBackends).
*
* For most core repos:
* - zones Associative array of zone names that each map to an array with:
* container : backend container name the zone is in
* directory : root path within container for the zone
* url : base URL to the root of the zone
* urlsByExt : map of file extension types to base URLs
* (useful for using a different cache for videos)
* handlerUrl : base script-handled URL to the root of the zone
* (see FileRepo::getZoneHandlerUrl() function)
* Zones default to using "<repo name>-<zone name>" as the container name
* and default to using the container root as the zone's root directory.
* Nesting of zone locations within other zones should be avoided.
* - url Public zone URL. The 'zones' settings take precedence.
* - hashLevels The number of directory levels for hash-based division of files
* - thumbScriptUrl The URL for thumb.php (optional, not recommended)
* - transformVia404 Whether to skip media file transformation on parse and rely on a 404
* handler instead.
* - initialCapital Equivalent to $wgCapitalLinks (or $wgCapitalLinkOverrides[NS_FILE],
* determines whether filenames implicitly start with a capital letter.
* The current implementation may give incorrect description page links
* when the local $wgCapitalLinks and initialCapital are mismatched.
* - pathDisclosureProtection
* May be 'paranoid' to remove all parameters from error messages, 'none' to
* leave the paths in unchanged, or 'simple' to replace paths with
* placeholders. Default for LocalRepo is 'simple'.
* - fileMode This allows wikis to set the file mode when uploading/moving files. Default
* is 0644.
* - directory The local filesystem directory where public files are stored. Not used for
* some remote repos.
* - thumbDir The base thumbnail directory. Defaults to "<directory>/thumb".
* - thumbUrl The base thumbnail URL. Defaults to "<url>/thumb".
* - isPrivate Set this if measures should always be taken to keep the files private.
* One should not trust this to assure that the files are not web readable;
* the server configuration should be done manually depending on the backend.
*
* These settings describe a foreign MediaWiki installation. They are optional, and will be ignored
* for local repositories:
* - descBaseUrl URL of image description pages, e.g. http://en.wikipedia.org/wiki/File:
* - scriptDirUrl URL of the MediaWiki installation, equivalent to $wgScriptPath, e.g.
* http://en.wikipedia.org/w
* - scriptExtension Script extension of the MediaWiki installation, equivalent to
* $wgScriptExtension, e.g. .php5 defaults to .php
*
* - articleUrl Equivalent to $wgArticlePath, e.g. http://en.wikipedia.org/wiki/$1
* - fetchDescription Fetch the text of the remote file description page. Equivalent to
* $wgFetchCommonsDescriptions.
* - abbrvThreshold File names over this size will use the short form of thumbnail names.
* Short thumbnail names only have the width, parameters, and the extension.
*
* ForeignDBRepo:
* - dbType, dbServer, dbUser, dbPassword, dbName, dbFlags
* equivalent to the corresponding member of $wgDBservers
* - tablePrefix Table prefix, the foreign wiki's $wgDBprefix
* - hasSharedCache True if the wiki's shared cache is accessible via the local $wgMemc
*
* ForeignAPIRepo:
* - apibase Use for the foreign API's URL
* - apiThumbCacheExpiry How long to locally cache thumbs for
*
* If you leave $wgLocalFileRepo set to false, Setup will fill in appropriate values.
* Otherwise, set $wgLocalFileRepo to a repository structure as described above.
* If you set $wgUseInstantCommons to true, it will add an entry for Commons.
* If you set $wgForeignFileRepos to an array of repository structures, those will
* be searched after the local file repo.
* Otherwise, you will only have access to local media files.
*
* @see Setup.php for an example usage and default initialization.
*/
$wgLocalFileRepo = false;
/** @see $wgLocalFileRepo */
$wgForeignFileRepos = array();
/**
* Use Commons as a remote file repository. Essentially a wrapper, when this
* is enabled $wgForeignFileRepos will point at Commons with a set of default
* settings
*/
$wgUseInstantCommons = false;
/**
* File backend structure configuration.
*
* This is an array of file backend configuration arrays.
* Each backend configuration has the following parameters:
* - 'name' : A unique name for the backend
* - 'class' : The file backend class to use
* - 'wikiId' : A unique string that identifies the wiki (container prefix)
* - 'lockManager' : The name of a lock manager (see $wgLockManagers)
*
* See FileBackend::__construct() for more details.
* Additional parameters are specific to the file backend class used.
* These settings should be global to all wikis when possible.
*
* There are two particularly important aspects about each backend:
* - a) Whether it is fully qualified or wiki-relative.
* By default, the paths of files are relative to the current wiki,
* which works via prefixing them with the current wiki ID when accessed.
* Setting 'wikiId' forces the backend to be fully qualified by prefixing
* all paths with the specified value instead. This can be useful if
* multiple wikis need to share the same data. Note that 'name' is *not*
* part of any prefix and thus should not be relied upon for namespacing.
* - b) Whether it is only defined for some wikis or is defined on all
* wikis in the wiki farm. Defining a backend globally is useful
* if multiple wikis need to share the same data.
* One should be aware of these aspects when configuring a backend for use with
* any basic feature or plugin. For example, suppose an extension stores data for
* different wikis in different directories and sometimes needs to access data from
* a foreign wiki's directory in order to render a page on given wiki. The extension
* would need a fully qualified backend that is defined on all wikis in the wiki farm.
*/
$wgFileBackends = array();
/**
* Array of configuration arrays for each lock manager.
* Each backend configuration has the following parameters:
* - 'name' : A unique name for the lock manager
* - 'class' : The lock manger class to use
*
* See LockManager::__construct() for more details.
* Additional parameters are specific to the lock manager class used.
* These settings should be global to all wikis.
*/
$wgLockManagers = array();
/**
* Show EXIF data, on by default if available.
* Requires PHP's EXIF extension: http://www.php.net/manual/en/ref.exif.php
*
* @note FOR WINDOWS USERS:
* To enable EXIF functions, add the following lines to the "Windows
* extensions" section of php.ini:
* @code{.ini}
* extension=extensions/php_mbstring.dll
* extension=extensions/php_exif.dll
* @endcode
*/
$wgShowEXIF = function_exists( 'exif_read_data' );
/**
* If to automatically update the img_metadata field
* if the metadata field is outdated but compatible with the current version.
* Defaults to false.
*/
$wgUpdateCompatibleMetadata = false;
/**
* If you operate multiple wikis, you can define a shared upload path here.
* Uploads to this wiki will NOT be put there - they will be put into
* $wgUploadDirectory.
* If $wgUseSharedUploads is set, the wiki will look in the shared repository if
* no file of the given name is found in the local repository (for [[File:..]],
* [[Media:..]] links). Thumbnails will also be looked for and generated in this
* directory.
*
* Note that these configuration settings can now be defined on a per-
* repository basis for an arbitrary number of file repositories, using the
* $wgForeignFileRepos variable.
*/
$wgUseSharedUploads = false;
/** Full path on the web server where shared uploads can be found */
$wgSharedUploadPath = "http://commons.wikimedia.org/shared/images";
/** Fetch commons image description pages and display them on the local wiki? */
$wgFetchCommonsDescriptions = false;
/** Path on the file system where shared uploads can be found. */
$wgSharedUploadDirectory = "/var/www/wiki3/images";
/** DB name with metadata about shared directory. Set this to false if the uploads do not come from a wiki. */
$wgSharedUploadDBname = false;
/** Optional table prefix used in database. */
$wgSharedUploadDBprefix = '';
/** Cache shared metadata in memcached. Don't do this if the commons wiki is in a different memcached domain */
$wgCacheSharedUploads = true;
/**
* Allow for upload to be copied from an URL.
* The timeout for copy uploads is set by $wgHTTPTimeout.
* You have to assign the user right 'upload_by_url' to a user group, to use this.
*/
$wgAllowCopyUploads = false;
/**
* Allow asynchronous copy uploads.
* This feature is experimental and broken as of r81612.
*/
$wgAllowAsyncCopyUploads = false;
/**
* A list of domains copy uploads can come from
*
* @since 1.20
*/
$wgCopyUploadsDomains = array();
/**
* Enable copy uploads from Special:Upload. $wgAllowCopyUploads must also be
* true. If $wgAllowCopyUploads is true, but this is false, you will only be
* able to perform copy uploads from the API or extensions (e.g. UploadWizard).
*/
$wgCopyUploadsFromSpecialUpload = false;
/**
* Proxy to use for copy upload requests.
* @since 1.20
*/
$wgCopyUploadProxy = false;
/**
* Max size for uploads, in bytes. If not set to an array, applies to all
* uploads. If set to an array, per upload type maximums can be set, using the
* file and url keys. If the * key is set this value will be used as maximum
* for non-specified types.
*
* @par Example:
* @code
* $wgMaxUploadSize = array(
* '*' => 250 * 1024,
* 'url' => 500 * 1024,
* );
* @endcode
* Sets the maximum for all uploads to 250 kB except for upload-by-url, which
* will have a maximum of 500 kB.
*
*/
$wgMaxUploadSize = 1024 * 1024 * 100; # 100MB
/**
* Point the upload navigation link to an external URL
* Useful if you want to use a shared repository by default
* without disabling local uploads (use $wgEnableUploads = false for that).
*
* @par Example:
* @code
* $wgUploadNavigationUrl = 'http://commons.wikimedia.org/wiki/Special:Upload';
* @endcode
*/
$wgUploadNavigationUrl = false;
/**
* Point the upload link for missing files to an external URL, as with
* $wgUploadNavigationUrl. The URL will get "(?|&)wpDestFile=<filename>"
* appended to it as appropriate.
*/
$wgUploadMissingFileUrl = false;
/**
* Give a path here to use thumb.php for thumbnail generation on client
* request, instead of generating them on render and outputting a static URL.
* This is necessary if some of your apache servers don't have read/write
* access to the thumbnail path.
*
* @par Example:
* @code
* $wgThumbnailScriptPath = "{$wgScriptPath}/thumb{$wgScriptExtension}";
* @endcode
*/
$wgThumbnailScriptPath = false;
/**
* @see $wgThumbnailScriptPath
*/
$wgSharedThumbnailScriptPath = false;
/**
* Set this to false if you do not want MediaWiki to divide your images
* directory into many subdirectories, for improved performance.
*
* It's almost always good to leave this enabled. In previous versions of
* MediaWiki, some users set this to false to allow images to be added to the
* wiki by simply copying them into $wgUploadDirectory and then running
* maintenance/rebuildImages.php to register them in the database. This is no
* longer recommended, use maintenance/importImages.php instead.
*
* @note That this variable may be ignored if $wgLocalFileRepo is set.
* @todo Deprecate the setting and ultimately remove it from Core.
*/
$wgHashedUploadDirectory = true;
/**
* Set the following to false especially if you have a set of files that need to
* be accessible by all wikis, and you do not want to use the hash (path/a/aa/)
* directory layout.
*/
$wgHashedSharedUploadDirectory = true;
/**
* Base URL for a repository wiki. Leave this blank if uploads are just stored
* in a shared directory and not meant to be accessible through a separate wiki.
* Otherwise the image description pages on the local wiki will link to the
* image description page on this wiki.
*
* Please specify the namespace, as in the example below.
*/
$wgRepositoryBaseUrl = "http://commons.wikimedia.org/wiki/File:";
/**
* This is the list of preferred extensions for uploading files. Uploading files
* with extensions not in this list will trigger a warning.
*
* @warning If you add any OpenOffice or Microsoft Office file formats here,
* such as odt or doc, and untrusted users are allowed to upload files, then
* your wiki will be vulnerable to cross-site request forgery (CSRF).
*/
$wgFileExtensions = array( 'png', 'gif', 'jpg', 'jpeg' );
/**
* Files with these extensions will never be allowed as uploads.
* An array of file extensions to blacklist. You should append to this array
* if you want to blacklist additional files.
* */
$wgFileBlacklist = array(
# HTML may contain cookie-stealing JavaScript and web bugs
'html', 'htm', 'js', 'jsb', 'mhtml', 'mht', 'xhtml', 'xht',
# PHP scripts may execute arbitrary code on the server
'php', 'phtml', 'php3', 'php4', 'php5', 'phps',
# Other types that may be interpreted by some servers
'shtml', 'jhtml', 'pl', 'py', 'cgi',
# May contain harmful executables for Windows victims
'exe', 'scr', 'dll', 'msi', 'vbs', 'bat', 'com', 'pif', 'cmd', 'vxd', 'cpl' );
/**
* Files with these mime types will never be allowed as uploads
* if $wgVerifyMimeType is enabled.
*/
$wgMimeTypeBlacklist = array(
# HTML may contain cookie-stealing JavaScript and web bugs
'text/html', 'text/javascript', 'text/x-javascript', 'application/x-shellscript',
# PHP scripts may execute arbitrary code on the server
'application/x-php', 'text/x-php',
# Other types that may be interpreted by some servers
'text/x-python', 'text/x-perl', 'text/x-bash', 'text/x-sh', 'text/x-csh',
# Client-side hazards on Internet Explorer
'text/scriptlet', 'application/x-msdownload',
# Windows metafile, client-side vulnerability on some systems
'application/x-msmetafile',
);
/**
* Allow Java archive uploads.
* This is not recommended for public wikis since a maliciously-constructed
* applet running on the same domain as the wiki can steal the user's cookies.
*/
$wgAllowJavaUploads = false;
/**
* This is a flag to determine whether or not to check file extensions on upload.
*
* @warning Setting this to false is insecure for public wikis.
*/
$wgCheckFileExtensions = true;
/**
* If this is turned off, users may override the warning for files not covered
* by $wgFileExtensions.
*
* @warning Setting this to false is insecure for public wikis.
*/
$wgStrictFileExtensions = true;
/**
* Setting this to true will disable the upload system's checks for HTML/JavaScript.
*
* @warning THIS IS VERY DANGEROUS on a publicly editable site, so USE
* $wgGroupPermissions TO RESTRICT UPLOADING to only those that you trust
*/
$wgDisableUploadScriptChecks = false;
/**
* Warn if uploaded files are larger than this (in bytes), or false to disable
*/
$wgUploadSizeWarning = false;
/**
* list of trusted media-types and mime types.
* Use the MEDIATYPE_xxx constants to represent media types.
* This list is used by File::isSafeFile
*
* Types not listed here will have a warning about unsafe content
* displayed on the images description page. It would also be possible
* to use this for further restrictions, like disabling direct
* [[media:...]] links for non-trusted formats.
*/
$wgTrustedMediaFormats = array(
MEDIATYPE_BITMAP, //all bitmap formats
MEDIATYPE_AUDIO, //all audio formats
MEDIATYPE_VIDEO, //all plain video formats
"image/svg+xml", //svg (only needed if inline rendering of svg is not supported)
"application/pdf", //PDF files
#"application/x-shockwave-flash", //flash/shockwave movie
);
/**
* Plugins for media file type handling.
* Each entry in the array maps a MIME type to a class name
*/
$wgMediaHandlers = array(
'image/jpeg' => 'JpegHandler',
'image/png' => 'PNGHandler',
'image/gif' => 'GIFHandler',
'image/tiff' => 'TiffHandler',
'image/x-ms-bmp' => 'BmpHandler',
'image/x-bmp' => 'BmpHandler',
'image/x-xcf' => 'XCFHandler',
'image/svg+xml' => 'SvgHandler', // official
'image/svg' => 'SvgHandler', // compat
'image/vnd.djvu' => 'DjVuHandler', // official
'image/x.djvu' => 'DjVuHandler', // compat
'image/x-djvu' => 'DjVuHandler', // compat
);
/**
* Plugins for page content model handling.
* Each entry in the array maps a model id to a class name.
*
* @since 1.21
*/
$wgContentHandlers = array(
// the usual case
CONTENT_MODEL_WIKITEXT => 'WikitextContentHandler',
// dumb version, no syntax highlighting
CONTENT_MODEL_JAVASCRIPT => 'JavaScriptContentHandler',
// dumb version, no syntax highlighting
CONTENT_MODEL_CSS => 'CssContentHandler',
// plain text, for use by extensions etc
CONTENT_MODEL_TEXT => 'TextContentHandler',
);
/**
* Resizing can be done using PHP's internal image libraries or using
* ImageMagick or another third-party converter, e.g. GraphicMagick.
* These support more file formats than PHP, which only supports PNG,
* GIF, JPG, XBM and WBMP.
*
* Use Image Magick instead of PHP builtin functions.
*/
$wgUseImageMagick = false;
/** The convert command shipped with ImageMagick */
$wgImageMagickConvertCommand = '/usr/bin/convert';
/** The identify command shipped with ImageMagick */
$wgImageMagickIdentifyCommand = '/usr/bin/identify';
/** Sharpening parameter to ImageMagick */
$wgSharpenParameter = '0x0.4';
/** Reduction in linear dimensions below which sharpening will be enabled */
$wgSharpenReductionThreshold = 0.85;
/**
* Temporary directory used for ImageMagick. The directory must exist. Leave
* this set to false to let ImageMagick decide for itself.
*/
$wgImageMagickTempDir = false;
/**
* Use another resizing converter, e.g. GraphicMagick
* %s will be replaced with the source path, %d with the destination
* %w and %h will be replaced with the width and height.
*
* @par Example for GraphicMagick:
* @code
* $wgCustomConvertCommand = "gm convert %s -resize %wx%h %d"
* @endcode
*
* Leave as false to skip this.
*/
$wgCustomConvertCommand = false;
/** used for lossless jpeg rotation
*
* @since 1.21
* **/
$wgJpegTran = '/usr/bin/jpegtran';
/**
* Some tests and extensions use exiv2 to manipulate the EXIF metadata in some
* image formats.
*/
$wgExiv2Command = '/usr/bin/exiv2';
/**
* Scalable Vector Graphics (SVG) may be uploaded as images.
* Since SVG support is not yet standard in browsers, it is
* necessary to rasterize SVGs to PNG as a fallback format.
*
* An external program is required to perform this conversion.
* If set to an array, the first item is a PHP callable and any further items
* are passed as parameters after $srcPath, $dstPath, $width, $height
*/
$wgSVGConverters = array(
'ImageMagick' => '$path/convert -background white -thumbnail $widthx$height\! $input PNG:$output',
'sodipodi' => '$path/sodipodi -z -w $width -f $input -e $output',
'inkscape' => '$path/inkscape -z -w $width -f $input -e $output',
'batik' => 'java -Djava.awt.headless=true -jar $path/batik-rasterizer.jar -w $width -d $output $input',
'rsvg' => '$path/rsvg -w $width -h $height $input $output',
'imgserv' => '$path/imgserv-wrapper -i svg -o png -w$width $input $output',
'ImagickExt' => array( 'SvgHandler::rasterizeImagickExt' ),
);
/** Pick a converter defined in $wgSVGConverters */
$wgSVGConverter = 'ImageMagick';
/** If not in the executable PATH, specify the SVG converter path. */
$wgSVGConverterPath = '';
/** Don't scale a SVG larger than this */
$wgSVGMaxSize = 2048;
/** Don't read SVG metadata beyond this point.
* Default is 1024*256 bytes
*/
$wgSVGMetadataCutoff = 262144;
/**
* Disallow <title> element in SVG files.
*
* MediaWiki will reject HTMLesque tags in uploaded files due to idiotic
* browsers which can not perform basic stuff like MIME detection and which are
* vulnerable to further idiots uploading crap files as images.
*
* When this directive is on, "<title>" will be allowed in files with an
* "image/svg+xml" MIME type. You should leave this disabled if your web server
* is misconfigured and doesn't send appropriate MIME types for SVG images.
*/
$wgAllowTitlesInSVG = false;
/**
* The maximum number of pixels a source image can have if it is to be scaled
* down by a scaler that requires the full source image to be decompressed
* and stored in decompressed form, before the thumbnail is generated.
*
* This provides a limit on memory usage for the decompression side of the
* image scaler. The limit is used when scaling PNGs with any of the
* built-in image scalers, such as ImageMagick or GD. It is ignored for
* JPEGs with ImageMagick, and when using the VipsScaler extension.
*
* The default is 50 MB if decompressed to RGBA form, which corresponds to
* 12.5 million pixels or 3500x3500.
*/
$wgMaxImageArea = 1.25e7;
/**
* Force thumbnailing of animated GIFs above this size to a single
* frame instead of an animated thumbnail. As of MW 1.17 this limit
* is checked against the total size of all frames in the animation.
* It probably makes sense to keep this equal to $wgMaxImageArea.
*/
$wgMaxAnimatedGifArea = 1.25e7;
/**
* Browsers don't support TIFF inline generally...
* For inline display, we need to convert to PNG or JPEG.
* Note scaling should work with ImageMagick, but may not with GD scaling.
*
* @par Example:
* @code
* // PNG is lossless, but inefficient for photos
* $wgTiffThumbnailType = array( 'png', 'image/png' );
* // JPEG is good for photos, but has no transparency support. Bad for diagrams.
* $wgTiffThumbnailType = array( 'jpg', 'image/jpeg' );
* @endcode
*/
$wgTiffThumbnailType = false;
/**
* If rendered thumbnail files are older than this timestamp, they
* will be rerendered on demand as if the file didn't already exist.
* Update if there is some need to force thumbs and SVG rasterizations
* to rerender, such as fixes to rendering bugs.
*/
$wgThumbnailEpoch = '20030516000000';
/**
* If set, inline scaled images will still produce "<img>" tags ready for
* output instead of showing an error message.
*
* This may be useful if errors are transitory, especially if the site
* is configured to automatically render thumbnails on request.
*
* On the other hand, it may obscure error conditions from debugging.
* Enable the debug log or the 'thumbnail' log group to make sure errors
* are logged to a file for review.
*/
$wgIgnoreImageErrors = false;
/**
* Allow thumbnail rendering on page view. If this is false, a valid
* thumbnail URL is still output, but no file will be created at
* the target location. This may save some time if you have a
* thumb.php or 404 handler set up which is faster than the regular
* webserver(s).
*/
$wgGenerateThumbnailOnParse = true;
/**
* Show thumbnails for old images on the image description page
*/
$wgShowArchiveThumbnails = true;
/** Obsolete, always true, kept for compatibility with extensions */
$wgUseImageResize = true;
/**
* If set to true, images that contain certain the exif orientation tag will
* be rotated accordingly. If set to null, try to auto-detect whether a scaler
* is available that can rotate.
*/
$wgEnableAutoRotation = null;
/**
* Internal name of virus scanner. This serves as a key to the
* $wgAntivirusSetup array. Set this to NULL to disable virus scanning. If not
* null, every file uploaded will be scanned for viruses.
*/
$wgAntivirus = null;
/**
* Configuration for different virus scanners. This an associative array of
* associative arrays. It contains one setup array per known scanner type.
* The entry is selected by $wgAntivirus, i.e.
* valid values for $wgAntivirus are the keys defined in this array.
*
* The configuration array for each scanner contains the following keys:
* "command", "codemap", "messagepattern":
*
* "command" is the full command to call the virus scanner - %f will be
* replaced with the name of the file to scan. If not present, the filename
* will be appended to the command. Note that this must be overwritten if the
* scanner is not in the system path; in that case, please set
* $wgAntivirusSetup[$wgAntivirus]['command'] to the desired command with full
* path.
*
* "codemap" is a mapping of exit code to return codes of the detectVirus
* function in SpecialUpload.
* - An exit code mapped to AV_SCAN_FAILED causes the function to consider
* the scan to be failed. This will pass the file if $wgAntivirusRequired
* is not set.
* - An exit code mapped to AV_SCAN_ABORTED causes the function to consider
* the file to have an unsupported format, which is probably immune to
* viruses. This causes the file to pass.
* - An exit code mapped to AV_NO_VIRUS will cause the file to pass, meaning
* no virus was found.
* - All other codes (like AV_VIRUS_FOUND) will cause the function to report
* a virus.
* - You may use "*" as a key in the array to catch all exit codes not mapped otherwise.
*
* "messagepattern" is a perl regular expression to extract the meaningful part of the scanners
* output. The relevant part should be matched as group one (\1).
* If not defined or the pattern does not match, the full message is shown to the user.
*/
$wgAntivirusSetup = array(
#setup for clamav
'clamav' => array(
'command' => 'clamscan --no-summary ',
'codemap' => array(
"0" => AV_NO_VIRUS, # no virus
"1" => AV_VIRUS_FOUND, # virus found
"52" => AV_SCAN_ABORTED, # unsupported file format (probably immune)
"*" => AV_SCAN_FAILED, # else scan failed
),
'messagepattern' => '/.*?:(.*)/sim',
),
);
/** Determines if a failed virus scan (AV_SCAN_FAILED) will cause the file to be rejected. */
$wgAntivirusRequired = true;
/** Determines if the mime type of uploaded files should be checked */
$wgVerifyMimeType = true;
/** Sets the mime type definition file to use by MimeMagic.php. */
$wgMimeTypeFile = 'includes/mime.types';
#$wgMimeTypeFile = '/etc/mime.types';
#$wgMimeTypeFile = null; #use built-in defaults only.
/** Sets the mime type info file to use by MimeMagic.php. */
$wgMimeInfoFile = 'includes/mime.info';
#$wgMimeInfoFile = null; #use built-in defaults only.
/**
* Switch for loading the FileInfo extension by PECL at runtime.
* This should be used only if fileinfo is installed as a shared object
* or a dynamic library.
*/
$wgLoadFileinfoExtension = false;
/** Sets an external mime detector program. The command must print only
* the mime type to standard output.
* The name of the file to process will be appended to the command given here.
* If not set or NULL, mime_content_type will be used if available.
*
* @par Example:
* @code
* #$wgMimeDetectorCommand = "file -bi"; # use external mime detector (Linux)
* @endcode
*/
$wgMimeDetectorCommand = null;
/**
* Switch for trivial mime detection. Used by thumb.php to disable all fancy
* things, because only a few types of images are needed and file extensions
* can be trusted.
*/
$wgTrivialMimeDetection = false;
/**
* Additional XML types we can allow via mime-detection.
* array = ( 'rootElement' => 'associatedMimeType' )
*/
$wgXMLMimeTypes = array(
'http://www.w3.org/2000/svg:svg' => 'image/svg+xml',
'svg' => 'image/svg+xml',
'http://www.lysator.liu.se/~alla/dia/:diagram' => 'application/x-dia-diagram',
'http://www.w3.org/1999/xhtml:html' => 'text/html', // application/xhtml+xml?
'html' => 'text/html', // application/xhtml+xml?
);
/**
* Limit images on image description pages to a user-selectable limit. In order
* to reduce disk usage, limits can only be selected from a list.
* The user preference is saved as an array offset in the database, by default
* the offset is set with $wgDefaultUserOptions['imagesize']. Make sure you
* change it if you alter the array (see bug 8858).
* This is the list of settings the user can choose from:
*/
$wgImageLimits = array(
array( 320, 240 ),
array( 640, 480 ),
array( 800, 600 ),
array( 1024, 768 ),
array( 1280, 1024 )
);
/**
* Adjust thumbnails on image pages according to a user setting. In order to
* reduce disk usage, the values can only be selected from a list. This is the
* list of settings the user can choose from:
*/
$wgThumbLimits = array(
120,
150,
180,
200,
250,
300
);
/**
* Default parameters for the "<gallery>" tag
*/
$wgGalleryOptions = array(
'imagesPerRow' => 0, // Default number of images per-row in the gallery. 0 -> Adapt to screensize
'imageWidth' => 120, // Width of the cells containing images in galleries (in "px")
'imageHeight' => 120, // Height of the cells containing images in galleries (in "px")
'captionLength' => 25, // Length of caption to truncate (in characters)
'showBytes' => true, // Show the filesize in bytes in categories
);
/**
* Adjust width of upright images when parameter 'upright' is used
* This allows a nicer look for upright images without the need to fix the width
* by hardcoded px in wiki sourcecode.
*/
$wgThumbUpright = 0.75;
/**
* Default value for chmoding of new directories.
*/
$wgDirectoryMode = 0777;
/**
* Generate and use thumbnails suitable for screens with 1.5 and 2.0 pixel densities.
*
* This means a 320x240 use of an image on the wiki will also generate 480x360 and 640x480
* thumbnails, output via data-src-1-5 and data-src-2-0. Runtime JavaScript switches the
* images in after loading the original low-resolution versions depending on the reported
* window.devicePixelRatio.
*/
$wgResponsiveImages = true;
/**
* @name DJVU settings
* @{
*/
/**
* Path of the djvudump executable
* Enable this and $wgDjvuRenderer to enable djvu rendering
*/
# $wgDjvuDump = 'djvudump';
$wgDjvuDump = null;
/**
* Path of the ddjvu DJVU renderer
* Enable this and $wgDjvuDump to enable djvu rendering
*/
# $wgDjvuRenderer = 'ddjvu';
$wgDjvuRenderer = null;
/**
* Path of the djvutxt DJVU text extraction utility
* Enable this and $wgDjvuDump to enable text layer extraction from djvu files
*/
# $wgDjvuTxt = 'djvutxt';
$wgDjvuTxt = null;
/**
* Path of the djvutoxml executable
* This works like djvudump except much, much slower as of version 3.5.
*
* For now we recommend you use djvudump instead. The djvuxml output is
* probably more stable, so we'll switch back to it as soon as they fix
* the efficiency problem.
* http://sourceforge.net/tracker/index.php?func=detail&aid=1704049&group_id=32953&atid=406583
*
* @par Example:
* @code
* $wgDjvuToXML = 'djvutoxml';
* @endcode
*/
$wgDjvuToXML = null;
/**
* Shell command for the DJVU post processor
* Default: pnmtopng, since ddjvu generates ppm output
* Set this to false to output the ppm file directly.
*/
$wgDjvuPostProcessor = 'pnmtojpeg';
/**
* File extension for the DJVU post processor output
*/
$wgDjvuOutputExtension = 'jpg';
/** @} */ # end of DJvu }
/** @} */ # end of file uploads }
/************************************************************************//**
* @name Email settings
* @{
*/
$serverName = substr( $wgServer, strrpos( $wgServer, '/' ) + 1 );
/**
* Site admin email address.
*/
$wgEmergencyContact = 'wikiadmin@' . $serverName;
/**
* Password reminder email address.
*
* The address we should use as sender when a user is requesting his password.
*/
$wgPasswordSender = 'apache@' . $serverName;
unset( $serverName ); # Don't leak local variables to global scope
/**
* Password reminder name
*/
$wgPasswordSenderName = 'MediaWiki Mail';
/**
* Dummy address which should be accepted during mail send action.
* It might be necessary to adapt the address or to set it equal
* to the $wgEmergencyContact address.
*/
$wgNoReplyAddress = 'reply@not.possible';
/**
* Set to true to enable the e-mail basic features:
* Password reminders, etc. If sending e-mail on your
* server doesn't work, you might want to disable this.
*/
$wgEnableEmail = true;
/**
* Set to true to enable user-to-user e-mail.
* This can potentially be abused, as it's hard to track.
*/
$wgEnableUserEmail = true;
/**
* Set to true to put the sending user's email in a Reply-To header
* instead of From. ($wgEmergencyContact will be used as From.)
*
* Some mailers (eg sSMTP) set the SMTP envelope sender to the From value,
* which can cause problems with SPF validation and leak recipient addresses
* when bounces are sent to the sender.
*/
$wgUserEmailUseReplyTo = false;
/**
* Minimum time, in hours, which must elapse between password reminder
* emails for a given account. This is to prevent abuse by mail flooding.
*/
$wgPasswordReminderResendTime = 24;
/**
* The time, in seconds, when an emailed temporary password expires.
*/
$wgNewPasswordExpiry = 3600 * 24 * 7;
/**
* The time, in seconds, when an email confirmation email expires
*/
$wgUserEmailConfirmationTokenExpiry = 7 * 24 * 60 * 60;
/**
* SMTP Mode.
*
* For using a direct (authenticated) SMTP server connection.
* Default to false or fill an array :
*
* @code
* $wgSMTP = array(
* 'host' => 'SMTP domain',
* 'IDHost' => 'domain for MessageID',
* 'port' => '25',
* 'auth' => [true|false],
* 'username' => [SMTP username],
* 'password' => [SMTP password],
* );
* @endcode
*/
$wgSMTP = false;
/**
* Additional email parameters, will be passed as the last argument to mail() call.
* If using safe_mode this has no effect
*/
$wgAdditionalMailParams = null;
/**
* For parts of the system that have been updated to provide HTML email content, send
* both text and HTML parts as the body of the email
*/
$wgAllowHTMLEmail = false;
/**
* True: from page editor if s/he opted-in. False: Enotif mails appear to come
* from $wgEmergencyContact
*/
$wgEnotifFromEditor = false;
// TODO move UPO to preferences probably ?
# If set to true, users get a corresponding option in their preferences and can choose to enable or disable at their discretion
# If set to false, the corresponding input form on the user preference page is suppressed
# It call this to be a "user-preferences-option (UPO)"
/**
* Require email authentication before sending mail to an email address.
* This is highly recommended. It prevents MediaWiki from being used as an open
* spam relay.
*/
$wgEmailAuthentication = true;
/**
* Allow users to enable email notification ("enotif") on watchlist changes.
*/
$wgEnotifWatchlist = false;
/**
* Allow users to enable email notification ("enotif") when someone edits their
* user talk page.
*/
$wgEnotifUserTalk = false;
/**
* Set the Reply-to address in notifications to the editor's address, if user
* allowed this in the preferences.
*/
$wgEnotifRevealEditorAddress = false;
/**
* Send notification mails on minor edits to watchlist pages. This is enabled
* by default. Does not affect user talk notifications.
*/
$wgEnotifMinorEdits = true;
/**
* Send a generic mail instead of a personalised mail for each user. This
* always uses UTC as the time zone, and doesn't include the username.
*
* For pages with many users watching, this can significantly reduce mail load.
* Has no effect when using sendmail rather than SMTP.
*/
$wgEnotifImpersonal = false;
/**
* Maximum number of users to mail at once when using impersonal mail. Should
* match the limit on your mail server.
*/
$wgEnotifMaxRecips = 500;
/**
* Send mails via the job queue. This can be useful to reduce the time it
* takes to save a page that a lot of people are watching.
*/
$wgEnotifUseJobQ = false;
/**
* Use real name instead of username in e-mail "from" field.
*/
$wgEnotifUseRealName = false;
/**
* Array of usernames who will be sent a notification email for every change
* which occurs on a wiki. Users will not be notified of their own changes.
*/
$wgUsersNotifiedOnAllChanges = array();
/** @} */ # end of email settings
/************************************************************************//**
* @name Database settings
* @{
*/
/** Database host name or IP address */
$wgDBserver = 'localhost';
/** Database port number (for PostgreSQL) */
$wgDBport = 5432;
/** Name of the database */
$wgDBname = 'my_wiki';
/** Database username */
$wgDBuser = 'wikiuser';
/** Database user's password */
$wgDBpassword = '';
/** Database type */
$wgDBtype = 'mysql';
/** Whether to use SSL in DB connection. */
$wgDBssl = false;
/** Whether to use compression in DB connection. */
$wgDBcompress = false;
/** Separate username for maintenance tasks. Leave as null to use the default. */
$wgDBadminuser = null;
/** Separate password for maintenance tasks. Leave as null to use the default. */
$wgDBadminpassword = null;
/**
* Search type.
* Leave as null to select the default search engine for the
* selected database type (eg SearchMySQL), or set to a class
* name to override to a custom search engine.
*/
$wgSearchType = null;
/** Table name prefix */
$wgDBprefix = '';
/** MySQL table options to use during installation or update */
$wgDBTableOptions = 'ENGINE=InnoDB';
/**
* SQL Mode - default is turning off all modes, including strict, if set.
* null can be used to skip the setting for performance reasons and assume
* DBA has done his best job.
* String override can be used for some additional fun :-)
*/
$wgSQLMode = '';
/** Mediawiki schema */
$wgDBmwschema = 'mediawiki';
/** To override default SQLite data directory ($docroot/../data) */
$wgSQLiteDataDir = '';
/**
* Make all database connections secretly go to localhost. Fool the load balancer
* thinking there is an arbitrarily large cluster of servers to connect to.
* Useful for debugging.
*/
$wgAllDBsAreLocalhost = false;
/**
* Shared database for multiple wikis. Commonly used for storing a user table
* for single sign-on. The server for this database must be the same as for the
* main database.
*
* For backwards compatibility the shared prefix is set to the same as the local
* prefix, and the user table is listed in the default list of shared tables.
* The user_properties table is also added so that users will continue to have their
* preferences shared (preferences were stored in the user table prior to 1.16)
*
* $wgSharedTables may be customized with a list of tables to share in the shared
* database. However it is advised to limit what tables you do share as many of
* MediaWiki's tables may have side effects if you try to share them.
*
* $wgSharedPrefix is the table prefix for the shared database. It defaults to
* $wgDBprefix.
*
* @deprecated In new code, use the $wiki parameter to wfGetLB() to access
* remote databases. Using wfGetLB() allows the shared database to reside on
* separate servers to the wiki's own database, with suitable configuration
* of $wgLBFactoryConf.
*/
$wgSharedDB = null;
/** @see $wgSharedDB */
$wgSharedPrefix = false;
/** @see $wgSharedDB */
$wgSharedTables = array( 'user', 'user_properties' );
/**
* Database load balancer
* This is a two-dimensional array, an array of server info structures
* Fields are:
* - host: Host name
* - dbname: Default database name
* - user: DB user
* - password: DB password
* - type: "mysql" or "postgres"
* - load: ratio of DB_SLAVE load, must be >=0, the sum of all loads must be >0
* - groupLoads: array of load ratios, the key is the query group name. A query may belong
* to several groups, the most specific group defined here is used.
*
* - flags: bit field
* - DBO_DEFAULT -- turns on DBO_TRX only if !$wgCommandLineMode (recommended)
* - DBO_DEBUG -- equivalent of $wgDebugDumpSql
* - DBO_TRX -- wrap entire request in a transaction
* - DBO_IGNORE -- ignore errors (not useful in LocalSettings.php)
* - DBO_NOBUFFER -- turn off buffering (not useful in LocalSettings.php)
* - DBO_PERSISTENT -- enables persistent database connections
* - DBO_SSL -- uses SSL/TLS encryption in database connections, if available
* - DBO_COMPRESS -- uses internal compression in database connections, if available
*
* - max lag: (optional) Maximum replication lag before a slave will taken out of rotation
* - max threads: (optional) Maximum number of running threads
*
* These and any other user-defined properties will be assigned to the mLBInfo member
* variable of the Database object.
*
* Leave at false to use the single-server variables above. If you set this
* variable, the single-server variables will generally be ignored (except
* perhaps in some command-line scripts).
*
* The first server listed in this array (with key 0) will be the master. The
* rest of the servers will be slaves. To prevent writes to your slaves due to
* accidental misconfiguration or MediaWiki bugs, set read_only=1 on all your
* slaves in my.cnf. You can set read_only mode at runtime using:
*
* @code
* SET @@read_only=1;
* @endcode
*
* Since the effect of writing to a slave is so damaging and difficult to clean
* up, we at Wikimedia set read_only=1 in my.cnf on all our DB servers, even
* our masters, and then set read_only=0 on masters at runtime.
*/
$wgDBservers = false;
/**
* Load balancer factory configuration
* To set up a multi-master wiki farm, set the class here to something that
* can return a LoadBalancer with an appropriate master on a call to getMainLB().
* The class identified here is responsible for reading $wgDBservers,
* $wgDBserver, etc., so overriding it may cause those globals to be ignored.
*
* The LBFactory_Multi class is provided for this purpose, please see
* includes/db/LBFactory_Multi.php for configuration information.
*/
$wgLBFactoryConf = array( 'class' => 'LBFactory_Simple' );
/** How long to wait for a slave to catch up to the master */
$wgMasterWaitTimeout = 10;
/** File to log database errors to */
$wgDBerrorLog = false;
/**
* Timezone to use in the error log.
* Defaults to the wiki timezone ($wgLocaltimezone).
*
* A list of usable timezones can found at:
* http://php.net/manual/en/timezones.php
*
* @par Examples:
* @code
* $wgLocaltimezone = 'UTC';
* $wgLocaltimezone = 'GMT';
* $wgLocaltimezone = 'PST8PDT';
* $wgLocaltimezone = 'Europe/Sweden';
* $wgLocaltimezone = 'CET';
* @endcode
*
* @since 1.20
*/
$wgDBerrorLogTZ = false;
/** When to give an error message */
$wgDBClusterTimeout = 10;
/**
* Scale load balancer polling time so that under overload conditions, the
* database server receives a SHOW STATUS query at an average interval of this
* many microseconds
*/
$wgDBAvgStatusPoll = 2000;
/**
* Set to true to engage MySQL 4.1/5.0 charset-related features;
* for now will just cause sending of 'SET NAMES=utf8' on connect.
*
* @warning THIS IS EXPERIMENTAL!
*
* May break if you're not using the table defs from mysql5/tables.sql.
* May break if you're upgrading an existing wiki if set differently.
* Broken symptoms likely to include incorrect behavior with page titles,
* usernames, comments etc containing non-ASCII characters.
* Might also cause failures on the object cache and other things.
*
* Even correct usage may cause failures with Unicode supplementary
* characters (those not in the Basic Multilingual Plane) unless MySQL
* has enhanced their Unicode support.
*/
$wgDBmysql5 = false;
/**
* Other wikis on this site, can be administered from a single developer
* account.
* Array numeric key => database name
*/
$wgLocalDatabases = array();
/**
* If lag is higher than $wgSlaveLagWarning, show a warning in some special
* pages (like watchlist). If the lag is higher than $wgSlaveLagCritical,
* show a more obvious warning.
*/
$wgSlaveLagWarning = 10;
/** @see $wgSlaveLagWarning */
$wgSlaveLagCritical = 30;
/**
* Use old names for change_tags indices.
*/
$wgOldChangeTagsIndex = false;
/**@}*/ # End of DB settings }
/************************************************************************//**
* @name Text storage
* @{
*/
/**
* We can also compress text stored in the 'text' table. If this is set on, new
* revisions will be compressed on page save if zlib support is available. Any
* compressed revisions will be decompressed on load regardless of this setting
* *but will not be readable at all* if zlib support is not available.
*/
$wgCompressRevisions = false;
/**
* External stores allow including content
* from non database sources following URL links.
*
* Short names of ExternalStore classes may be specified in an array here:
* @code
* $wgExternalStores = array("http","file","custom")...
* @endcode
*
* CAUTION: Access to database might lead to code execution
*/
$wgExternalStores = false;
/**
* An array of external MySQL servers.
*
* @par Example:
* Create a cluster named 'cluster1' containing three servers:
* @code
* $wgExternalServers = array(
* 'cluster1' => array( 'srv28', 'srv29', 'srv30' )
* );
* @endcode
*
* Used by LBFactory_Simple, may be ignored if $wgLBFactoryConf is set to
* another class.
*/
$wgExternalServers = array();
/**
* The place to put new revisions, false to put them in the local text table.
* Part of a URL, e.g. DB://cluster1
*
* Can be an array instead of a single string, to enable data distribution. Keys
* must be consecutive integers, starting at zero.
*
* @par Example:
* @code
* $wgDefaultExternalStore = array( 'DB://cluster1', 'DB://cluster2' );
* @endcode
*
* @var array
*/
$wgDefaultExternalStore = false;
/**
* Revision text may be cached in $wgMemc to reduce load on external storage
* servers and object extraction overhead for frequently-loaded revisions.
*
* Set to 0 to disable, or number of seconds before cache expiry.
*/
$wgRevisionCacheExpiry = 0;
/** @} */ # end text storage }
/************************************************************************//**
* @name Performance hacks and limits
* @{
*/
/** Disable database-intensive features */
$wgMiserMode = false;
/** Disable all query pages if miser mode is on, not just some */
$wgDisableQueryPages = false;
/** Number of rows to cache in 'querycache' table when miser mode is on */
$wgQueryCacheLimit = 1000;
/** Number of links to a page required before it is deemed "wanted" */
$wgWantedPagesThreshold = 1;
/** Enable slow parser functions */
$wgAllowSlowParserFunctions = false;
/** Allow schema updates */
$wgAllowSchemaUpdates = true;
/**
* Do DELETE/INSERT for link updates instead of incremental
*/
$wgUseDumbLinkUpdate = false;
/**
* Anti-lock flags - bitfield
* - ALF_NO_LINK_LOCK:
* Don't use locking reads when updating the link table. This is
* necessary for wikis with a high edit rate for performance
* reasons, but may cause link table inconsistency
*/
$wgAntiLockFlags = 0;
/**
* Maximum article size in kilobytes
*/
$wgMaxArticleSize = 2048;
/**
* The minimum amount of memory that MediaWiki "needs"; MediaWiki will try to
* raise PHP's memory limit if it's below this amount.
*/
$wgMemoryLimit = "50M";
/** @} */ # end performance hacks }
/************************************************************************//**
* @name Cache settings
* @{
*/
/**
* Directory for caching data in the local filesystem. Should not be accessible
* from the web. Set this to false to not use any local caches.
*
* Note: if multiple wikis share the same localisation cache directory, they
* must all have the same set of extensions. You can set a directory just for
* the localisation cache using $wgLocalisationCacheConf['storeDirectory'].
*/
$wgCacheDirectory = false;
/**
* Main cache type. This should be a cache with fast access, but it may have
* limited space. By default, it is disabled, since the database is not fast
* enough to make it worthwhile.
*
* The options are:
*
* - CACHE_ANYTHING: Use anything, as long as it works
* - CACHE_NONE: Do not cache
* - CACHE_DB: Store cache objects in the DB
* - CACHE_MEMCACHED: MemCached, must specify servers in $wgMemCachedServers
* - CACHE_ACCEL: APC, XCache or WinCache
* - CACHE_DBA: Use PHP's DBA extension to store in a DBM-style
* database. This is slow, and is not recommended for
* anything other than debugging.
* - (other): A string may be used which identifies a cache
* configuration in $wgObjectCaches.
*
* @see $wgMessageCacheType, $wgParserCacheType
*/
$wgMainCacheType = CACHE_NONE;
/**
* The cache type for storing the contents of the MediaWiki namespace. This
* cache is used for a small amount of data which is expensive to regenerate.
*
* For available types see $wgMainCacheType.
*/
$wgMessageCacheType = CACHE_ANYTHING;
/**
* The cache type for storing article HTML. This is used to store data which
* is expensive to regenerate, and benefits from having plenty of storage space.
*
* For available types see $wgMainCacheType.
*/
$wgParserCacheType = CACHE_ANYTHING;
/**
* The cache type for storing session data. Used if $wgSessionsInObjectCache is true.
*
* For available types see $wgMainCacheType.
*/
$wgSessionCacheType = CACHE_ANYTHING;
/**
* The cache type for storing language conversion tables,
* which are used when parsing certain text and interface messages.
*
* For available types see $wgMainCacheType.
*
* @since 1.20
*/
$wgLanguageConverterCacheType = CACHE_ANYTHING;
/**
* Advanced object cache configuration.
*
* Use this to define the class names and constructor parameters which are used
* for the various cache types. Custom cache types may be defined here and
* referenced from $wgMainCacheType, $wgMessageCacheType, $wgParserCacheType,
* or $wgLanguageConverterCacheType.
*
* The format is an associative array where the key is a cache identifier, and
* the value is an associative array of parameters. The "class" parameter is the
* class name which will be used. Alternatively, a "factory" parameter may be
* given, giving a callable function which will generate a suitable cache object.
*
* The other parameters are dependent on the class used.
* - CACHE_DBA uses $wgTmpDirectory by default. The 'dir' parameter let you
* overrides that.
*/
$wgObjectCaches = array(
CACHE_NONE => array( 'class' => 'EmptyBagOStuff' ),
CACHE_DB => array( 'class' => 'SqlBagOStuff', 'table' => 'objectcache' ),
CACHE_DBA => array( 'class' => 'DBABagOStuff' ),
CACHE_ANYTHING => array( 'factory' => 'ObjectCache::newAnything' ),
CACHE_ACCEL => array( 'factory' => 'ObjectCache::newAccelerator' ),
CACHE_MEMCACHED => array( 'factory' => 'ObjectCache::newMemcached' ),
'apc' => array( 'class' => 'APCBagOStuff' ),
'xcache' => array( 'class' => 'XCacheBagOStuff' ),
'wincache' => array( 'class' => 'WinCacheBagOStuff' ),
'memcached-php' => array( 'class' => 'MemcachedPhpBagOStuff' ),
'memcached-pecl' => array( 'class' => 'MemcachedPeclBagOStuff' ),
'hash' => array( 'class' => 'HashBagOStuff' ),
);
/**
* The expiry time for the parser cache, in seconds.
* The default is 86400 (one day).
*/
$wgParserCacheExpireTime = 86400;
/**
* Select which DBA handler <http://www.php.net/manual/en/dba.requirements.php>
* to use as CACHE_DBA backend.
*/
$wgDBAhandler = 'db3';
/**
* Deprecated alias for $wgSessionsInObjectCache.
*
* @deprecated since 1.20; Use $wgSessionsInObjectCache
*/
$wgSessionsInMemcached = false;
/**
* Store sessions in an object cache, configured by $wgSessionCacheType. This
* can be useful to improve performance, or to avoid the locking behavior of
* PHP's default session handler, which tends to prevent multiple requests for
* the same user from acting concurrently.
*/
$wgSessionsInObjectCache = false;
/**
* The expiry time to use for session storage when $wgSessionsInObjectCache is
* enabled, in seconds.
*/
$wgObjectCacheSessionExpiry = 3600;
/**
* This is used for setting php's session.save_handler. In practice, you will
* almost never need to change this ever. Other options might be 'user' or
* 'session_mysql.' Setting to null skips setting this entirely (which might be
* useful if you're doing cross-application sessions, see bug 11381)
*/
$wgSessionHandler = null;
/** If enabled, will send MemCached debugging information to $wgDebugLogFile */
$wgMemCachedDebug = false;
/** The list of MemCached servers and port numbers */
$wgMemCachedServers = array( '127.0.0.1:11000' );
/**
* Use persistent connections to MemCached, which are shared across multiple
* requests.
*/
$wgMemCachedPersistent = false;
/**
* Read/write timeout for MemCached server communication, in microseconds.
*/
$wgMemCachedTimeout = 500000;
/**
* Set this to true to make a local copy of the message cache, for use in
* addition to memcached. The files will be put in $wgCacheDirectory.
*/
$wgUseLocalMessageCache = false;
/**
* Defines format of local cache.
* - true: Serialized object
* - false: PHP source file (Warning - security risk)
*/
$wgLocalMessageCacheSerialized = true;
/**
* Instead of caching everything, only cache those messages which have
* been customised in the site content language. This means that
* MediaWiki:Foo/ja is ignored if MediaWiki:Foo doesn't exist.
* This option is probably only useful for translatewiki.net.
*/
$wgAdaptiveMessageCache = false;
/**
* Localisation cache configuration. Associative array with keys:
* class: The class to use. May be overridden by extensions.
*
* store: The location to store cache data. May be 'files', 'db' or
* 'detect'. If set to "files", data will be in CDB files. If set
* to "db", data will be stored to the database. If set to
* "detect", files will be used if $wgCacheDirectory is set,
* otherwise the database will be used.
*
* storeClass: The class name for the underlying storage. If set to a class
* name, it overrides the "store" setting.
*
* storeDirectory: If the store class puts its data in files, this is the
* directory it will use. If this is false, $wgCacheDirectory
* will be used.
*
* manualRecache: Set this to true to disable cache updates on web requests.
* Use maintenance/rebuildLocalisationCache.php instead.
*/
$wgLocalisationCacheConf = array(
'class' => 'LocalisationCache',
'store' => 'detect',
'storeClass' => false,
'storeDirectory' => false,
'manualRecache' => false,
);
/** Allow client-side caching of pages */
$wgCachePages = true;
/**
* Set this to current time to invalidate all prior cached pages. Affects both
* client-side and server-side caching.
* You can get the current date on your server by using the command:
* @verbatim
* date +%Y%m%d%H%M%S
* @endverbatim
*/
$wgCacheEpoch = '20030516000000';
/**
* Bump this number when changing the global style sheets and JavaScript.
*
* It should be appended in the query string of static CSS and JS includes,
* to ensure that client-side caches do not keep obsolete copies of global
* styles.
*/
$wgStyleVersion = '303';
/**
* This will cache static pages for non-logged-in users to reduce
* database traffic on public sites.
* Must set $wgShowIPinHeader = false
* ResourceLoader requests to default language and skins are cached
* as well as single module requests.
*/
$wgUseFileCache = false;
/**
* Depth of the subdirectory hierarchy to be created under
* $wgFileCacheDirectory. The subdirectories will be named based on
* the MD5 hash of the title. A value of 0 means all cache files will
* be put directly into the main file cache directory.
*/
$wgFileCacheDepth = 2;
/**
* Keep parsed pages in a cache (objectcache table or memcached)
* to speed up output of the same page viewed by another user with the
* same options.
*
* This can provide a significant speedup for medium to large pages,
* so you probably want to keep it on. Extensions that conflict with the
* parser cache should disable the cache on a per-page basis instead.
*/
$wgEnableParserCache = true;
/**
* Append a configured value to the parser cache and the sitenotice key so
* that they can be kept separate for some class of activity.
*/
$wgRenderHashAppend = '';
/**
* If on, the sidebar navigation links are cached for users with the
* current language set. This can save a touch of load on a busy site
* by shaving off extra message lookups.
*
* However it is also fragile: changing the site configuration, or
* having a variable $wgArticlePath, can produce broken links that
* don't update as expected.
*/
$wgEnableSidebarCache = false;
/**
* Expiry time for the sidebar cache, in seconds
*/
$wgSidebarCacheExpiry = 86400;
/**
* When using the file cache, we can store the cached HTML gzipped to save disk
* space. Pages will then also be served compressed to clients that support it.
*
* Requires zlib support enabled in PHP.
*/
$wgUseGzip = false;
/**
* Whether MediaWiki should send an ETag header. Seems to cause
* broken behavior with Squid 2.6, see bug 7098.
*/
$wgUseETag = false;
/** Clock skew or the one-second resolution of time() can occasionally cause cache
* problems when the user requests two pages within a short period of time. This
* variable adds a given number of seconds to vulnerable timestamps, thereby giving
* a grace period.
*/
$wgClockSkewFudge = 5;
/**
* Invalidate various caches when LocalSettings.php changes. This is equivalent
* to setting $wgCacheEpoch to the modification time of LocalSettings.php, as
* was previously done in the default LocalSettings.php file.
*
* On high-traffic wikis, this should be set to false, to avoid the need to
* check the file modification time, and to avoid the performance impact of
* unnecessary cache invalidations.
*/
$wgInvalidateCacheOnLocalSettingsChange = true;
/** @} */ # end of cache settings
/************************************************************************//**
* @name HTTP proxy (Squid) settings
*
* Many of these settings apply to any HTTP proxy used in front of MediaWiki,
* although they are referred to as Squid settings for historical reasons.
*
* Achieving a high hit ratio with an HTTP proxy requires special
* configuration. See http://www.mediawiki.org/wiki/Manual:Squid_caching for
* more details.
*
* @{
*/
/**
* Enable/disable Squid.
* See http://www.mediawiki.org/wiki/Manual:Squid_caching
*/
$wgUseSquid = false;
/** If you run Squid3 with ESI support, enable this (default:false): */
$wgUseESI = false;
/** Send X-Vary-Options header for better caching (requires patched Squid) */
$wgUseXVO = false;
/** Add X-Forwarded-Proto to the Vary and X-Vary-Options headers for API
* requests and RSS/Atom feeds. Use this if you have an SSL termination setup
* and need to split the cache between HTTP and HTTPS for API requests,
* feed requests and HTTP redirect responses in order to prevent cache
* pollution. This does not affect 'normal' requests to index.php other than
* HTTP redirects.
*/
$wgVaryOnXFP = false;
/**
* Internal server name as known to Squid, if different.
*
* @par Example:
* @code
* $wgInternalServer = 'http://yourinternal.tld:8000';
* @endcode
*/
$wgInternalServer = false;
/**
* Cache timeout for the squid, will be sent as s-maxage (without ESI) or
* Surrogate-Control (with ESI). Without ESI, you should strip out s-maxage in
* the Squid config. 18000 seconds = 5 hours, more cache hits with 2678400 = 31
* days
*/
$wgSquidMaxage = 18000;
/**
* Default maximum age for raw CSS/JS accesses
*/
$wgForcedRawSMaxage = 300;
/**
* List of proxy servers to purge on changes; default port is 80. Use IP addresses.
*
* When MediaWiki is running behind a proxy, it will trust X-Forwarded-For
* headers sent/modified from these proxies when obtaining the remote IP address
*
* For a list of trusted servers which *aren't* purged, see $wgSquidServersNoPurge.
*/
$wgSquidServers = array();
/**
* As above, except these servers aren't purged on page changes; use to set a
* list of trusted proxies, etc.
*/
$wgSquidServersNoPurge = array();
/** Maximum number of titles to purge in any one client operation */
$wgMaxSquidPurgeTitles = 400;
/**
* Whether to use a Host header in purge requests sent to the proxy servers
* configured in $wgSquidServers. Set this to false to support Squid
* configured in forward-proxy mode.
*
* If this is set to true, a Host header will be sent, and only the path
* component of the URL will appear on the request line, as if the request
* were a non-proxy HTTP 1.1 request. Varnish only supports this style of
* request. Squid supports this style of request only if reverse-proxy mode
* (http_port ... accel) is enabled.
*
* If this is set to false, no Host header will be sent, and the absolute URL
* will be sent in the request line, as is the standard for an HTTP proxy
* request in both HTTP 1.0 and 1.1. This style of request is not supported
* by Varnish, but is supported by Squid in either configuration (forward or
* reverse).
*
* @since 1.21
*/
$wgSquidPurgeUseHostHeader = true;
/**
* Routing configuration for HTCP multicast purging. Add elements here to
* enable HTCP and determine which purges are sent where. If set to an empty
* array, HTCP is disabled.
*
* Each key in this array is a regular expression to match against the purged
* URL, or an empty string to match all URLs. The purged URL is matched against
* the regexes in the order specified, and the first rule whose regex matches
* is used.
*
* Example configuration to send purges for upload.wikimedia.org to one
* multicast group and all other purges to another:
* @code
* $wgHTCPMulticastRouting = array(
* '|^https?://upload\.wikimedia\.org|' => array(
* 'host' => '239.128.0.113',
* 'port' => 4827,
* ),
* '' => array(
* 'host' => '239.128.0.112',
* 'port' => 4827,
* ),
* );
* @endcode
*
* @since 1.20
*
* @see $wgHTCPMulticastTTL
*/
$wgHTCPMulticastRouting = array();
/**
* HTCP multicast address. Set this to a multicast IP address to enable HTCP.
*
* Note that MediaWiki uses the old non-RFC compliant HTCP format, which was
* present in the earliest Squid implementations of the protocol.
*
* This setting is DEPRECATED in favor of $wgHTCPMulticastRouting , and kept
* for backwards compatibility only. If $wgHTCPMulticastRouting is set, this
* setting is ignored. If $wgHTCPMulticastRouting is not set and this setting
* is, it is used to populate $wgHTCPMulticastRouting.
*
* @deprecated since 1.20 in favor of $wgHTCPMulticastRouting
*/
$wgHTCPMulticastAddress = false;
/**
* HTCP multicast port.
* @deprecated since 1.20 in favor of $wgHTCPMulticastRouting
* @see $wgHTCPMulticastAddress
*/
$wgHTCPPort = 4827;
/**
* HTCP multicast TTL.
* @see $wgHTCPMulticastRouting
*/
$wgHTCPMulticastTTL = 1;
/** Should forwarded Private IPs be accepted? */
$wgUsePrivateIPs = false;
/** @} */ # end of HTTP proxy settings
/************************************************************************//**
* @name Language, regional and character encoding settings
* @{
*/
/**
* Site language code. See languages/Names.php for languages supported by
* MediaWiki out of the box. Not all languages listed there have translations,
* see languages/messages/ for the list of languages with some localisation.
*
* Warning: Don't use language codes listed in $wgDummyLanguageCodes like "no"
* for Norwegian (use "nb" instead), or things will break unexpectedly.
*
* This defines the default interface language for all users, but users can
* change it in their preferences.
*
* This also defines the language of pages in the wiki. The content is wrapped
* in a html element with lang=XX attribute. This behavior can be overridden
* via hooks, see Title::getPageLanguage.
*/
$wgLanguageCode = 'en';
/**
* Language cache size, or really how many languages can we handle
* simultaneously without degrading to crawl speed.
*/
$wgLangObjCacheSize = 10;
/**
* Some languages need different word forms, usually for different cases.
* Used in Language::convertGrammar().
*
* @par Example:
* @code
* $wgGrammarForms['en']['genitive']['car'] = 'car\'s';
* @endcode
*/
$wgGrammarForms = array();
/** Treat language links as magic connectors, not inline links */
$wgInterwikiMagic = true;
/** Hide interlanguage links from the sidebar */
$wgHideInterlanguageLinks = false;
/** List of language names or overrides for default names in Names.php */
$wgExtraLanguageNames = array();
/**
* List of language codes that don't correspond to an actual language.
* These codes are mostly left-offs from renames, or other legacy things.
* This array makes them not appear as a selectable language on the installer,
* and excludes them when running the transstat.php script.
*/
$wgDummyLanguageCodes = array(
'als' => 'gsw',
'bat-smg' => 'sgs',
'be-x-old' => 'be-tarask',
'bh' => 'bho',
'fiu-vro' => 'vro',
'no' => 'nb',
'qqq' => 'qqq', # Used for message documentation.
'qqx' => 'qqx', # Used for viewing message keys.
'roa-rup' => 'rup',
'simple' => 'en',
'zh-classical' => 'lzh',
'zh-min-nan' => 'nan',
'zh-yue' => 'yue',
);
/**
* Character set for use in the article edit box. Language-specific encodings
* may be defined.
*
* This historic feature is one of the first that was added by former MediaWiki
* team leader Brion Vibber, and is used to support the Esperanto x-system.
*/
$wgEditEncoding = '';
/**
* Set this to true to replace Arabic presentation forms with their standard
* forms in the U+0600-U+06FF block. This only works if $wgLanguageCode is
* set to "ar".
*
* Note that pages with titles containing presentation forms will become
* inaccessible, run maintenance/cleanupTitles.php to fix this.
*/
$wgFixArabicUnicode = true;
/**
* Set this to true to replace ZWJ-based chillu sequences in Malayalam text
* with their Unicode 5.1 equivalents. This only works if $wgLanguageCode is
* set to "ml". Note that some clients (even new clients as of 2010) do not
* support these characters.
*
* If you enable this on an existing wiki, run maintenance/cleanupTitles.php to
* fix any ZWJ sequences in existing page titles.
*/
$wgFixMalayalamUnicode = true;
/**
* Set this to always convert certain Unicode sequences to modern ones
* regardless of the content language. This has a small performance
* impact.
*
* See $wgFixArabicUnicode and $wgFixMalayalamUnicode for conversion
* details.
*
* @since 1.17
*/
$wgAllUnicodeFixes = false;
/**
* Set this to eg 'ISO-8859-1' to perform character set conversion when
* loading old revisions not marked with "utf-8" flag. Use this when
* converting a wiki from MediaWiki 1.4 or earlier to UTF-8 without the
* burdensome mass conversion of old text data.
*
* @note This DOES NOT touch any fields other than old_text. Titles, comments,
* user names, etc still must be converted en masse in the database before
* continuing as a UTF-8 wiki.
*/
$wgLegacyEncoding = false;
/**
* Browser Blacklist for unicode non compliant browsers. Contains a list of
* regexps : "/regexp/" matching problematic browsers. These browsers will
* be served encoded unicode in the edit box instead of real unicode.
*/
$wgBrowserBlackList = array(
/**
* Netscape 2-4 detection
* The minor version may contain strings such as "Gold" or "SGoldC-SGI"
* Lots of non-netscape user agents have "compatible", so it's useful to check for that
* with a negative assertion. The [UIN] identifier specifies the level of security
* in a Netscape/Mozilla browser, checking for it rules out a number of fakers.
* The language string is unreliable, it is missing on NS4 Mac.
*
* Reference: http://www.psychedelix.com/agents/index.shtml
*/
'/^Mozilla\/2\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
'/^Mozilla\/3\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
'/^Mozilla\/4\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
/**
* MSIE on Mac OS 9 is teh sux0r, converts þ to <thorn>, ð to <eth>, Þ to <THORN> and Ð to <ETH>
*
* Known useragents:
* - Mozilla/4.0 (compatible; MSIE 5.0; Mac_PowerPC)
* - Mozilla/4.0 (compatible; MSIE 5.15; Mac_PowerPC)
* - Mozilla/4.0 (compatible; MSIE 5.23; Mac_PowerPC)
* - [...]
*
* @link http://en.wikipedia.org/w/index.php?title=User%3A%C6var_Arnfj%F6r%F0_Bjarmason%2Ftestme&diff=12356041&oldid=12355864
* @link http://en.wikipedia.org/wiki/Template%3AOS9
*/
'/^Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/',
/**
* Google wireless transcoder, seems to eat a lot of chars alive
* http://it.wikipedia.org/w/index.php?title=Luciano_Ligabue&diff=prev&oldid=8857361
*/
'/^Mozilla\/4\.0 \(compatible; MSIE 6.0; Windows NT 5.0; Google Wireless Transcoder;\)/'
);
/**
* If set to true, the MediaWiki 1.4 to 1.5 schema conversion will
* create stub reference rows in the text table instead of copying
* the full text of all current entries from 'cur' to 'text'.
*
* This will speed up the conversion step for large sites, but
* requires that the cur table be kept around for those revisions
* to remain viewable.
*
* This option affects the updaters *only*. Any present cur stub
* revisions will be readable at runtime regardless of this setting.
*/
$wgLegacySchemaConversion = false;
/**
* Enable dates like 'May 12' instead of '12 May', this only takes effect if
* the interface is set to English.
*/
$wgAmericanDates = false;
/**
* For Hindi and Arabic use local numerals instead of Western style (0-9)
* numerals in interface.
*/
$wgTranslateNumerals = true;
/**
* Translation using MediaWiki: namespace.
* Interface messages will be loaded from the database.
*/
$wgUseDatabaseMessages = true;
/**
* Expiry time for the message cache key
*/
$wgMsgCacheExpiry = 86400;
/**
* Maximum entry size in the message cache, in bytes
*/
$wgMaxMsgCacheEntrySize = 10000;
/** Whether to enable language variant conversion. */
$wgDisableLangConversion = false;
/** Whether to enable language variant conversion for links. */
$wgDisableTitleConversion = false;
/** Whether to enable canonical language links in meta data. */
$wgCanonicalLanguageLinks = true;
/** Default variant code, if false, the default will be the language code */
$wgDefaultLanguageVariant = false;
/**
* Disabled variants array of language variant conversion.
*
* @par Example:
* @code
* $wgDisabledVariants[] = 'zh-mo';
* $wgDisabledVariants[] = 'zh-my';
* @endcode
*/
$wgDisabledVariants = array();
/**
* Like $wgArticlePath, but on multi-variant wikis, this provides a
* path format that describes which parts of the URL contain the
* language variant.
*
* @par Example:
* @code
* $wgLanguageCode = 'sr';
* $wgVariantArticlePath = '/$2/$1';
* $wgArticlePath = '/wiki/$1';
* @endcode
*
* A link to /wiki/ would be redirected to /sr/Главна_страна
*
* It is important that $wgArticlePath not overlap with possible values
* of $wgVariantArticlePath.
*/
$wgVariantArticlePath = false;
/**
* Show a bar of language selection links in the user login and user
* registration forms; edit the "loginlanguagelinks" message to
* customise these.
*/
$wgLoginLanguageSelector = false;
/**
* When translating messages with wfMessage(), it is not always clear what
* should be considered UI messages and what should be content messages.
*
* For example, for the English Wikipedia, there should be only one 'mainpage',
* so when getting the link for 'mainpage', we should treat it as site content
* and call ->inContentLanguage()->text(), but for rendering the text of the
* link, we call ->text(). The code behaves this way by default. However,
* sites like the Wikimedia Commons do offer different versions of 'mainpage'
* and the like for different languages. This array provides a way to override
* the default behavior.
*
* @par Example:
* To allow language-specific main page and community
* portal:
* @code
* $wgForceUIMsgAsContentMsg = array( 'mainpage', 'portal-url' );
* @endcode
*/
$wgForceUIMsgAsContentMsg = array();
/**
* Fake out the timezone that the server thinks it's in. This will be used for
* date display and not for what's stored in the DB. Leave to null to retain
* your server's OS-based timezone value.
*
* This variable is currently used only for signature formatting and for local
* time/date parser variables ({{LOCALTIME}} etc.)
*
* Timezones can be translated by editing MediaWiki messages of type
* timezone-nameinlowercase like timezone-utc.
*
* A list of usable timezones can found at:
* http://php.net/manual/en/timezones.php
*
* @par Examples:
* @code
* $wgLocaltimezone = 'UTC';
* $wgLocaltimezone = 'GMT';
* $wgLocaltimezone = 'PST8PDT';
* $wgLocaltimezone = 'Europe/Sweden';
* $wgLocaltimezone = 'CET';
* @endcode
*/
$wgLocaltimezone = null;
/**
* Set an offset from UTC in minutes to use for the default timezone setting
* for anonymous users and new user accounts.
*
* This setting is used for most date/time displays in the software, and is
* overridable in user preferences. It is *not* used for signature timestamps.
*
* By default, this will be set to match $wgLocaltimezone.
*/
$wgLocalTZoffset = null;
/** @} */ # End of language/charset settings
/*************************************************************************//**
* @name Output format and skin settings
* @{
*/
/** The default Content-Type header. */
$wgMimeType = 'text/html';
/**
* The content type used in script tags. This is mostly going to be ignored if
* $wgHtml5 is true, at least for actual HTML output, since HTML5 doesn't
* require a MIME type for JavaScript or CSS (those are the default script and
* style languages).
*/
$wgJsMimeType = 'text/javascript';
/**
* The HTML document type. Ignored if $wgHtml5 is true, since <!DOCTYPE html>
* doesn't actually have a doctype part to put this variable's contents in.
*/
$wgDocType = '-//W3C//DTD XHTML 1.0 Transitional//EN';
/**
* The URL of the document type declaration. Ignored if $wgHtml5 is true,
* since HTML5 has no DTD, and <!DOCTYPE html> doesn't actually have a DTD part
* to put this variable's contents in.
*/
$wgDTD = 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd';
/**
* The default xmlns attribute. Ignored if $wgHtml5 is true (or it's supposed
* to be), since we don't currently support XHTML5, and in HTML5 (i.e., served
* as text/html) the attribute has no effect, so why bother?
*/
$wgXhtmlDefaultNamespace = 'http://www.w3.org/1999/xhtml';
/**
* Should we output an HTML5 doctype? If false, use XHTML 1.0 Transitional
* instead, and disable HTML5 features. This may eventually be removed and set
* to always true. If it's true, a number of other settings will be irrelevant
* and have no effect.
*/
$wgHtml5 = true;
/**
* Defines the value of the version attribute in the <html> tag, if any.
* This is ignored if $wgHtml5 is false. If $wgAllowRdfaAttributes and
* $wgHtml5 are both true, and this evaluates to boolean false (like if it's
* left at the default null value), it will be auto-initialized to the correct
* value for RDFa+HTML5. As such, you should have no reason to ever actually
* set this to anything.
*/
$wgHtml5Version = null;
/**
* Enabled RDFa attributes for use in wikitext.
* NOTE: Interaction with HTML5 is somewhat underspecified.
*/
$wgAllowRdfaAttributes = false;
/**
* Enabled HTML5 microdata attributes for use in wikitext, if $wgHtml5 is also true.
*/
$wgAllowMicrodataAttributes = false;
/**
* Should we try to make our HTML output well-formed XML? If set to false,
* output will be a few bytes shorter, and the HTML will arguably be more
* readable. If set to true, life will be much easier for the authors of
* screen-scraping bots, and the HTML will arguably be more readable.
*
* Setting this to false may omit quotation marks on some attributes, omit
* slashes from some self-closing tags, omit some ending tags, etc., where
* permitted by HTML5. Setting it to true will not guarantee that all pages
* will be well-formed, although non-well-formed pages should be rare and it's
* a bug if you find one. Conversely, setting it to false doesn't mean that
* all XML-y constructs will be omitted, just that they might be.
*
* Because of compatibility with screen-scraping bots, and because it's
* controversial, this is currently left to true by default.
*/
$wgWellFormedXml = true;
/**
* Permit other namespaces in addition to the w3.org default.
*
* Use the prefix for the key and the namespace for the value.
*
* @par Example:
* @code
* $wgXhtmlNamespaces['svg'] = 'http://www.w3.org/2000/svg';
* @endcode
* Normally we wouldn't have to define this in the root "<html>"
* element, but IE needs it there in some circumstances.
*
* This is ignored if $wgHtml5 is true, for the same reason as
* $wgXhtmlDefaultNamespace.
*/
$wgXhtmlNamespaces = array();
/**
* Show IP address, for non-logged in users. It's necessary to switch this off
* for some forms of caching.
* @warning Will disable file cache.
*/
$wgShowIPinHeader = true;
/**
* Site notice shown at the top of each page
*
* MediaWiki:Sitenotice page, which will override this. You can also
* provide a separate message for logged-out users using the
* MediaWiki:Anonnotice page.
*/
$wgSiteNotice = '';
/**
* A subtitle to add to the tagline, for skins that have it/
*/
$wgExtraSubtitle = '';
/**
* If this is set, a "donate" link will appear in the sidebar. Set it to a URL.
*/
$wgSiteSupportPage = '';
/**
* Validate the overall output using tidy and refuse
* to display the page if it's not valid.
*/
$wgValidateAllHtml = false;
/**
* Default skin, for new users and anonymous visitors. Registered users may
* change this to any one of the other available skins in their preferences.
* This has to be completely lowercase; see the "skins" directory for the list
* of available skins.
*/
$wgDefaultSkin = 'vector';
/**
* Specify the name of a skin that should not be presented in the list of
* available skins. Use for blacklisting a skin which you do not want to
* remove from the .../skins/ directory
*/
$wgSkipSkin = '';
/** Array for more like $wgSkipSkin. */
$wgSkipSkins = array();
/**
* Optionally, we can specify a stylesheet to use for media="handheld".
* This is recognized by some, but not all, handheld/mobile/PDA browsers.
* If left empty, compliant handheld browsers won't pick up the skin
* stylesheet, which is specified for 'screen' media.
*
* Can be a complete URL, base-relative path, or $wgStylePath-relative path.
* Try 'chick/main.css' to apply the Chick styles to the MonoBook HTML.
*
* Will also be switched in when 'handheld=yes' is added to the URL, like
* the 'printable=yes' mode for print media.
*/
$wgHandheldStyle = false;
/**
* If set, 'screen' and 'handheld' media specifiers for stylesheets are
* transformed such that they apply to the iPhone/iPod Touch Mobile Safari,
* which doesn't recognize 'handheld' but does support media queries on its
* screen size.
*
* Consider only using this if you have a *really good* handheld stylesheet,
* as iPhone users won't have any way to disable it and use the "grown-up"
* styles instead.
*/
$wgHandheldForIPhone = false;
/**
* Allow user Javascript page?
* This enables a lot of neat customizations, but may
* increase security risk to users and server load.
*/
$wgAllowUserJs = false;
/**
* Allow user Cascading Style Sheets (CSS)?
* This enables a lot of neat customizations, but may
* increase security risk to users and server load.
*/
$wgAllowUserCss = false;
/**
* Allow user-preferences implemented in CSS?
* This allows users to customise the site appearance to a greater
* degree; disabling it will improve page load times.
*/
$wgAllowUserCssPrefs = true;
/** Use the site's Javascript page? */
$wgUseSiteJs = true;
/** Use the site's Cascading Style Sheets (CSS)? */
$wgUseSiteCss = true;
/**
* Break out of framesets. This can be used to prevent clickjacking attacks,
* or to prevent external sites from framing your site with ads.
*/
$wgBreakFrames = false;
/**
* The X-Frame-Options header to send on pages sensitive to clickjacking
* attacks, such as edit pages. This prevents those pages from being displayed
* in a frame or iframe. The options are:
*
* - 'DENY': Do not allow framing. This is recommended for most wikis.
*
* - 'SAMEORIGIN': Allow framing by pages on the same domain. This can be used
* to allow framing within a trusted domain. This is insecure if there
* is a page on the same domain which allows framing of arbitrary URLs.
*
* - false: Allow all framing. This opens up the wiki to XSS attacks and thus
* full compromise of local user accounts. Private wikis behind a
* corporate firewall are especially vulnerable. This is not
* recommended.
*
* For extra safety, set $wgBreakFrames = true, to prevent framing on all pages,
* not just edit pages.
*/
$wgEditPageFrameOptions = 'DENY';
/**
* Disallow framing of API pages directly, by setting the X-Frame-Options
* header. Since the API returns CSRF tokens, allowing the results to be
* framed can compromise your user's account security.
* Options are:
* - 'DENY': Do not allow framing. This is recommended for most wikis.
* - 'SAMEORIGIN': Allow framing by pages on the same domain.
* - false: Allow all framing.
*/
$wgApiFrameOptions = 'DENY';
/**
* Disable output compression (enabled by default if zlib is available)
*/
$wgDisableOutputCompression = false;
/**
* Should we allow a broader set of characters in id attributes, per HTML5? If
* not, use only HTML 4-compatible IDs. This option is for testing -- when the
* functionality is ready, it will be on by default with no option.
*
* Currently this appears to work fine in all browsers, but it's disabled by
* default because it normalizes id's a bit too aggressively, breaking preexisting
* content (particularly Cite). See bug 27733, bug 27694, bug 27474.
*/
$wgExperimentalHtmlIds = false;
/**
* Abstract list of footer icons for skins in place of old copyrightico and poweredbyico code
* You can add new icons to the built in copyright or poweredby, or you can create
* a new block. Though note that you may need to add some custom css to get good styling
* of new blocks in monobook. vector and modern should work without any special css.
*
* $wgFooterIcons itself is a key/value array.
* The key is the name of a block that the icons will be wrapped in. The final id varies
* by skin; Monobook and Vector will turn poweredby into f-poweredbyico while Modern
* turns it into mw_poweredby.
* The value is either key/value array of icons or a string.
* In the key/value array the key may or may not be used by the skin but it can
* be used to find the icon and unset it or change the icon if needed.
* This is useful for disabling icons that are set by extensions.
* The value should be either a string or an array. If it is a string it will be output
* directly as html, however some skins may choose to ignore it. An array is the preferred format
* for the icon, the following keys are used:
* - src: An absolute url to the image to use for the icon, this is recommended
* but not required, however some skins will ignore icons without an image
* - url: The url to use in the a element around the text or icon, if not set an a element will not be outputted
* - alt: This is the text form of the icon, it will be displayed without an image in
* skins like Modern or if src is not set, and will otherwise be used as
* the alt="" for the image. This key is required.
* - width and height: If the icon specified by src is not of the standard size
* you can specify the size of image to use with these keys.
* Otherwise they will default to the standard 88x31.
* @todo Reformat documentation.
*/
$wgFooterIcons = array(
"copyright" => array(
"copyright" => array(), // placeholder for the built in copyright icon
),
"poweredby" => array(
"mediawiki" => array(
"src" => null, // Defaults to "$wgStylePath/common/images/poweredby_mediawiki_88x31.png"
"url" => "//www.mediawiki.org/",
"alt" => "Powered by MediaWiki",
)
),
);
/**
* Login / create account link behavior when it's possible for anonymous users
* to create an account.
* - true = use a combined login / create account link
* - false = split login and create account into two separate links
*/
$wgUseCombinedLoginLink = false;
/**
* Search form look for Vector skin only.
* - true = use an icon search button
* - false = use Go & Search buttons
*/
$wgVectorUseSimpleSearch = true;
/**
* Watch and unwatch as an icon rather than a link for Vector skin only.
* - true = use an icon watch/unwatch button
* - false = use watch/unwatch text link
*/
$wgVectorUseIconWatch = false;
/**
* Display user edit counts in various prominent places.
*/
$wgEdititis = false;
/**
* Better directionality support (bug 6100 and related).
* Removed in 1.18, still kept here for LiquidThreads backwards compatibility.
*
* @deprecated since 1.18
*/
$wgBetterDirectionality = true;
/**
* Some web hosts attempt to rewrite all responses with a 404 (not found)
* status code, mangling or hiding MediaWiki's output. If you are using such a
* host, you should start looking for a better one. While you're doing that,
* set this to false to convert some of MediaWiki's 404 responses to 200 so
* that the generated error pages can be seen.
*
* In cases where for technical reasons it is more important for MediaWiki to
* send the correct status code than for the body to be transmitted intact,
* this configuration variable is ignored.
*/
$wgSend404Code = true;
/**
* The $wgShowRollbackEditCount variable is used to show how many edits will be
* rollback. The numeric value of the variable are the limit up to are counted.
* If the value is false or 0, the edits are not counted. Disabling this will
* furthermore prevent MediaWiki from hiding some useless rollback links.
*
* @since 1.20
*/
$wgShowRollbackEditCount = 10;
/**
* Output a <link rel="canonical"> tag on every page indicating the canonical
* server which should be used, i.e. $wgServer or $wgCanonicalServer. Since
* detection of the current server is unreliable, the link is sent
* unconditionally.
*/
$wgEnableCanonicalServerLink = false;
/** @} */ # End of output format settings }
/*************************************************************************//**
* @name Resource loader settings
* @{
*/
/**
* Client-side resource modules.
*
* Extensions should add their resource loader module definitions
* to the $wgResourceModules variable.
*
* @par Example:
* @code
* $wgResourceModules['ext.myExtension'] = array(
* 'scripts' => 'myExtension.js',
* 'styles' => 'myExtension.css',
* 'dependencies' => array( 'jquery.cookie', 'jquery.tabIndex' ),
* 'localBasePath' => __DIR__,
* 'remoteExtPath' => 'MyExtension',
* );
* @endcode
*/
$wgResourceModules = array();
/**
* Extensions should register foreign module sources here. 'local' is a
* built-in source that is not in this array, but defined by
* ResourceLoader::__construct() so that it cannot be unset.
*
* @par Example:
* @code
* $wgResourceLoaderSources['foo'] = array(
* 'loadScript' => 'http://example.org/w/load.php',
* 'apiScript' => 'http://example.org/w/api.php'
* );
* @endcode
*/
$wgResourceLoaderSources = array();
/**
* Default 'remoteBasePath' value for instances of ResourceLoaderFileModule.
* If not set, then $wgScriptPath will be used as a fallback.
*/
$wgResourceBasePath = null;
/**
* Maximum time in seconds to cache resources served by the resource loader.
*
* @todo Document array structure
*/
$wgResourceLoaderMaxage = array(
'versioned' => array(
// Squid/Varnish but also any other public proxy cache between the client and MediaWiki
'server' => 30 * 24 * 60 * 60, // 30 days
// On the client side (e.g. in the browser cache).
'client' => 30 * 24 * 60 * 60, // 30 days
),
'unversioned' => array(
'server' => 5 * 60, // 5 minutes
'client' => 5 * 60, // 5 minutes
),
);
/**
* The default debug mode (on/off) for of ResourceLoader requests.
*
* This will still be overridden when the debug URL parameter is used.
*/
$wgResourceLoaderDebug = false;
/**
* Enable embedding of certain resources using Edge Side Includes. This will
* improve performance but only works if there is something in front of the
* web server (e..g a Squid or Varnish server) configured to process the ESI.
*/
$wgResourceLoaderUseESI = false;
/**
* Put each statement on its own line when minifying JavaScript. This makes
* debugging in non-debug mode a bit easier.
*/
$wgResourceLoaderMinifierStatementsOnOwnLine = false;
/**
* Maximum line length when minifying JavaScript. This is not a hard maximum:
* the minifier will try not to produce lines longer than this, but may be
* forced to do so in certain cases.
*/
$wgResourceLoaderMinifierMaxLineLength = 1000;
/**
* Whether to include the mediawiki.legacy JS library (old wikibits.js), and its
* dependencies.
*/
$wgIncludeLegacyJavaScript = true;
/**
* Whether to preload the mediawiki.util module as blocking module in the top
* queue.
*
* Before MediaWiki 1.19, modules used to load slower/less asynchronous which
* allowed modules to lack dependencies on 'popular' modules that were likely
* loaded already.
*
* This setting is to aid scripts during migration by providing mediawiki.util
* unconditionally (which was the most commonly missed dependency).
* It doesn't cover all missing dependencies obviously but should fix most of
* them.
*
* This should be removed at some point after site/user scripts have been fixed.
* Enable this if your wiki has a large amount of user/site scripts that are
* lacking dependencies.
* @todo Deprecate
*/
$wgPreloadJavaScriptMwUtil = false;
/**
* Whether or not to assign configuration variables to the global window object.
*
* If this is set to false, old code using deprecated variables will no longer
* work.
*
* @par Example of legacy code:
* @code{,js}
* if ( window.wgRestrictionEdit ) { ... }
* @endcode
* or:
* @code{,js}
* if ( wgIsArticle ) { ... }
* @endcode
*
* Instead, one needs to use mw.config.
* @par Example using mw.config global configuration:
* @code{,js}
* if ( mw.config.exists('wgRestrictionEdit') ) { ... }
* @endcode
* or:
* @code{,js}
* if ( mw.config.get('wgIsArticle') ) { ... }
* @endcode
*/
$wgLegacyJavaScriptGlobals = true;
/**
* If set to a positive number, ResourceLoader will not generate URLs whose
* query string is more than this many characters long, and will instead use
* multiple requests with shorter query strings. This degrades performance,
* but may be needed if your web server has a low (less than, say 1024)
* query string length limit or a low value for suhosin.get.max_value_length
* that you can't increase.
*
* If set to a negative number, ResourceLoader will assume there is no query
* string length limit.
*/
$wgResourceLoaderMaxQueryLength = -1;
/**
* If set to true, JavaScript modules loaded from wiki pages will be parsed
* prior to minification to validate it.
*
* Parse errors will result in a JS exception being thrown during module load,
* which avoids breaking other modules loaded in the same request.
*/
$wgResourceLoaderValidateJS = true;
/**
* If set to true, statically-sourced (file-backed) JavaScript resources will
* be parsed for validity before being bundled up into ResourceLoader modules.
*
* This can be helpful for development by providing better error messages in
* default (non-debug) mode, but JavaScript parsing is slow and memory hungry
* and may fail on large pre-bundled frameworks.
*/
$wgResourceLoaderValidateStaticJS = false;
/**
* If set to true, asynchronous loading of bottom-queue scripts in the "<head>"
* will be enabled. This is an experimental feature that's supposed to make
* JavaScript load faster.
*/
$wgResourceLoaderExperimentalAsyncLoading = false;
/** @} */ # End of resource loader settings }
/*************************************************************************//**
* @name Page title and interwiki link settings
* @{
*/
/**
* Name of the project namespace. If left set to false, $wgSitename will be
* used instead.
*/
$wgMetaNamespace = false;
/**
* Name of the project talk namespace.
*
* Normally you can ignore this and it will be something like
* $wgMetaNamespace . "_talk". In some languages, you may want to set this
* manually for grammatical reasons.
*/
$wgMetaNamespaceTalk = false;
/**
* Additional namespaces. If the namespaces defined in Language.php and
* Namespace.php are insufficient, you can create new ones here, for example,
* to import Help files in other languages. You can also override the namespace
* names of existing namespaces. Extensions developers should use
* $wgCanonicalNamespaceNames.
*
* @warning Once you delete a namespace, the pages in that namespace will
* no longer be accessible. If you rename it, then you can access them through
* the new namespace name.
*
* Custom namespaces should start at 100 to avoid conflicting with standard
* namespaces, and should always follow the even/odd main/talk pattern.
*
* @par Example:
* @code
* $wgExtraNamespaces = array(
* 100 => "Hilfe",
* 101 => "Hilfe_Diskussion",
* 102 => "Aide",
* 103 => "Discussion_Aide"
* );
* @endcode
*
* @todo Add a note about maintenance/namespaceDupes.php
*/
$wgExtraNamespaces = array();
/**
* Same as above, but for namespaces with gender distinction.
* Note: the default form for the namespace should also be set
* using $wgExtraNamespaces for the same index.
* @since 1.18
*/
$wgExtraGenderNamespaces = array();
/**
* Namespace aliases.
*
* These are alternate names for the primary localised namespace names, which
* are defined by $wgExtraNamespaces and the language file. If a page is
* requested with such a prefix, the request will be redirected to the primary
* name.
*
* Set this to a map from namespace names to IDs.
*
* @par Example:
* @code
* $wgNamespaceAliases = array(
* 'Wikipedian' => NS_USER,
* 'Help' => 100,
* );
* @endcode
*/
$wgNamespaceAliases = array();
/**
* Allowed title characters -- regex character class
* Don't change this unless you know what you're doing
*
* Problematic punctuation:
* - []{}|# Are needed for link syntax, never enable these
* - <> Causes problems with HTML escaping, don't use
* - % Enabled by default, minor problems with path to query rewrite rules, see below
* - + Enabled by default, but doesn't work with path to query rewrite rules, corrupted by apache
* - ? Enabled by default, but doesn't work with path to PATH_INFO rewrites
*
* All three of these punctuation problems can be avoided by using an alias,
* instead of a rewrite rule of either variety.
*
* The problem with % is that when using a path to query rewrite rule, URLs are
* double-unescaped: once by Apache's path conversion code, and again by PHP. So
* %253F, for example, becomes "?". Our code does not double-escape to compensate
* for this, indeed double escaping would break if the double-escaped title was
* passed in the query string rather than the path. This is a minor security issue
* because articles can be created such that they are hard to view or edit.
*
* In some rare cases you may wish to remove + for compatibility with old links.
*
* Theoretically 0x80-0x9F of ISO 8859-1 should be disallowed, but
* this breaks interlanguage links
*/
$wgLegalTitleChars = " %!\"$&'()*,\\-.\\/0-9:;=?@A-Z\\\\^_`a-z~\\x80-\\xFF+";
/**
* The interwiki prefix of the current wiki, or false if it doesn't have one.
*/
$wgLocalInterwiki = false;
/**
* Expiry time for cache of interwiki table
*/
$wgInterwikiExpiry = 10800;
/**
* @name Interwiki caching settings.
* @{
*/
/**
*$wgInterwikiCache specifies path to constant database file.
*
* This cdb database is generated by dumpInterwiki from maintenance and has
* such key formats:
* - dbname:key - a simple key (e.g. enwiki:meta)
* - _sitename:key - site-scope key (e.g. wiktionary:meta)
* - __global:key - global-scope key (e.g. __global:meta)
* - __sites:dbname - site mapping (e.g. __sites:enwiki)
*
* Sites mapping just specifies site name, other keys provide "local url"
* data layout.
*/
$wgInterwikiCache = false;
/**
* Specify number of domains to check for messages.
* - 1: Just wiki(db)-level
* - 2: wiki and global levels
* - 3: site levels
*/
$wgInterwikiScopes = 3;
/**
* $wgInterwikiFallbackSite - if unable to resolve from cache
*/
$wgInterwikiFallbackSite = 'wiki';
/** @} */ # end of Interwiki caching settings.
/**
* If local interwikis are set up which allow redirects,
* set this regexp to restrict URLs which will be displayed
* as 'redirected from' links.
*
* @par Example:
* It might look something like this:
* @code
* $wgRedirectSources = '!^https?://[a-z-]+\.wikipedia\.org/!';
* @endcode
*
* Leave at false to avoid displaying any incoming redirect markers.
* This does not affect intra-wiki redirects, which don't change
* the URL.
*/
$wgRedirectSources = false;
/**
* Set this to false to avoid forcing the first letter of links to capitals.
*
* @warning may break links! This makes links COMPLETELY case-sensitive. Links
* appearing with a capital at the beginning of a sentence will *not* go to the
* same place as links in the middle of a sentence using a lowercase initial.
*/
$wgCapitalLinks = true;
/**
* @since 1.16 - This can now be set per-namespace. Some special namespaces (such
* as Special, see MWNamespace::$alwaysCapitalizedNamespaces for the full list) must be
* true by default (and setting them has no effect), due to various things that
* require them to be so. Also, since Talk namespaces need to directly mirror their
* associated content namespaces, the values for those are ignored in favor of the
* subject namespace's setting. Setting for NS_MEDIA is taken automatically from
* NS_FILE.
*
* @par Example:
* @code
* $wgCapitalLinkOverrides[ NS_FILE ] = false;
* @endcode
*/
$wgCapitalLinkOverrides = array();
/** Which namespaces should support subpages?
* See Language.php for a list of namespaces.
*/
$wgNamespacesWithSubpages = array(
NS_TALK => true,
NS_USER => true,
NS_USER_TALK => true,
NS_PROJECT => true,
NS_PROJECT_TALK => true,
NS_FILE_TALK => true,
NS_MEDIAWIKI => true,
NS_MEDIAWIKI_TALK => true,
NS_TEMPLATE_TALK => true,
NS_HELP => true,
NS_HELP_TALK => true,
NS_CATEGORY_TALK => true
);
/**
* Array of namespaces which can be deemed to contain valid "content", as far
* as the site statistics are concerned. Useful if additional namespaces also
* contain "content" which should be considered when generating a count of the
* number of articles in the wiki.
*/
$wgContentNamespaces = array( NS_MAIN );
/**
* Max number of redirects to follow when resolving redirects.
* 1 means only the first redirect is followed (default behavior).
* 0 or less means no redirects are followed.
*/
$wgMaxRedirects = 1;
/**
* Array of invalid page redirect targets.
* Attempting to create a redirect to any of the pages in this array
* will make the redirect fail.
* Userlogout is hard-coded, so it does not need to be listed here.
* (bug 10569) Disallow Mypage and Mytalk as well.
*
* As of now, this only checks special pages. Redirects to pages in
* other namespaces cannot be invalidated by this variable.
*/
$wgInvalidRedirectTargets = array( 'Filepath', 'Mypage', 'Mytalk' );
/** @} */ # End of title and interwiki settings }
/************************************************************************//**
* @name Parser settings
* These settings configure the transformation from wikitext to HTML.
* @{
*/
/**
* Parser configuration. Associative array with the following members:
*
* class The class name
*
* preprocessorClass The preprocessor class. Two classes are currently available:
* Preprocessor_Hash, which uses plain PHP arrays for temporary
* storage, and Preprocessor_DOM, which uses the DOM module for
* temporary storage. Preprocessor_DOM generally uses less memory;
* the speed of the two is roughly the same.
*
* If this parameter is not given, it uses Preprocessor_DOM if the
* DOM module is available, otherwise it uses Preprocessor_Hash.
*
* The entire associative array will be passed through to the constructor as
* the first parameter. Note that only Setup.php can use this variable --
* the configuration will change at runtime via $wgParser member functions, so
* the contents of this variable will be out-of-date. The variable can only be
* changed during LocalSettings.php, in particular, it can't be changed during
* an extension setup function.
*/
$wgParserConf = array(
'class' => 'Parser',
#'preprocessorClass' => 'Preprocessor_Hash',
);
/** Maximum indent level of toc. */
$wgMaxTocLevel = 999;
/**
* A complexity limit on template expansion: the maximum number of nodes visited
* by PPFrame::expand()
*/
$wgMaxPPNodeCount = 1000000;
/**
* A complexity limit on template expansion: the maximum number of elements
* generated by Preprocessor::preprocessToObj(). This allows you to limit the
* amount of memory used by the Preprocessor_DOM node cache: testing indicates
* that each element uses about 160 bytes of memory on a 64-bit processor, so
* this default corresponds to about 155 MB.
*
* When the limit is exceeded, an exception is thrown.
*/
$wgMaxGeneratedPPNodeCount = 1000000;
/**
* Maximum recursion depth for templates within templates.
* The current parser adds two levels to the PHP call stack for each template,
* and xdebug limits the call stack to 100 by default. So this should hopefully
* stop the parser before it hits the xdebug limit.
*/
$wgMaxTemplateDepth = 40;
/** @see $wgMaxTemplateDepth */
$wgMaxPPExpandDepth = 40;
/** The external URL protocols */
$wgUrlProtocols = array(
'http://',
'https://',
'ftp://',
'irc://',
'ircs://', // @bug 28503
'gopher://',
'telnet://', // Well if we're going to support the above.. -ævar
'nntp://', // @bug 3808 RFC 1738
'worldwind://',
'mailto:',
'news:',
'svn://',
'git://',
'mms://',
'//', // for protocol-relative URLs
);
/**
* If true, removes (substitutes) templates in "~~~~" signatures.
*/
$wgCleanSignatures = true;
/** Whether to allow inline image pointing to other websites */
$wgAllowExternalImages = false;
/**
* If the above is false, you can specify an exception here. Image URLs
* that start with this string are then rendered, while all others are not.
* You can use this to set up a trusted, simple repository of images.
* You may also specify an array of strings to allow multiple sites
*
* @par Examples:
* @code
* $wgAllowExternalImagesFrom = 'http://127.0.0.1/';
* $wgAllowExternalImagesFrom = array( 'http://127.0.0.1/', 'http://example.com' );
* @endcode
*/
$wgAllowExternalImagesFrom = '';
/** If $wgAllowExternalImages is false, you can allow an on-wiki
* whitelist of regular expression fragments to match the image URL
* against. If the image matches one of the regular expression fragments,
* The image will be displayed.
*
* Set this to true to enable the on-wiki whitelist (MediaWiki:External image whitelist)
* Or false to disable it
*/
$wgEnableImageWhitelist = true;
/**
* A different approach to the above: simply allow the "<img>" tag to be used.
* This allows you to specify alt text and other attributes, copy-paste HTML to
* your wiki more easily, etc. However, allowing external images in any manner
* will allow anyone with editing rights to snoop on your visitors' IP
* addresses and so forth, if they wanted to, by inserting links to images on
* sites they control.
*/
$wgAllowImageTag = false;
/**
* $wgUseTidy: use tidy to make sure HTML output is sane.
* Tidy is a free tool that fixes broken HTML.
* See http://www.w3.org/People/Raggett/tidy/
*
* - $wgTidyBin should be set to the path of the binary and
* - $wgTidyConf to the path of the configuration file.
* - $wgTidyOpts can include any number of parameters.
* - $wgTidyInternal controls the use of the PECL extension or the
* libtidy (PHP >= 5) extension to use an in-process tidy library instead
* of spawning a separate program.
* Normally you shouldn't need to override the setting except for
* debugging. To install, use 'pear install tidy' and add a line
* 'extension=tidy.so' to php.ini.
*/
$wgUseTidy = false;
/** @see $wgUseTidy */
$wgAlwaysUseTidy = false;
/** @see $wgUseTidy */
$wgTidyBin = 'tidy';
/** @see $wgUseTidy */
$wgTidyConf = $IP . '/includes/tidy.conf';
/** @see $wgUseTidy */
$wgTidyOpts = '';
/** @see $wgUseTidy */
$wgTidyInternal = extension_loaded( 'tidy' );
/**
* Put tidy warnings in HTML comments
* Only works for internal tidy.
*/
$wgDebugTidy = false;
/** Allow raw, unchecked HTML in "<html>...</html>" sections.
* THIS IS VERY DANGEROUS on a publicly editable site, so USE wgGroupPermissions
* TO RESTRICT EDITING to only those that you trust
*/
$wgRawHtml = false;
/**
* Set a default target for external links, e.g. _blank to pop up a new window
*/
$wgExternalLinkTarget = false;
/**
* If true, external URL links in wiki text will be given the
* rel="nofollow" attribute as a hint to search engines that
* they should not be followed for ranking purposes as they
* are user-supplied and thus subject to spamming.
*/
$wgNoFollowLinks = true;
/**
* Namespaces in which $wgNoFollowLinks doesn't apply.
* See Language.php for a list of namespaces.
*/
$wgNoFollowNsExceptions = array();
/**
* If this is set to an array of domains, external links to these domain names
* (or any subdomains) will not be set to rel="nofollow" regardless of the
* value of $wgNoFollowLinks. For instance:
*
* $wgNoFollowDomainExceptions = array( 'en.wikipedia.org', 'wiktionary.org' );
*
* This would add rel="nofollow" to links to de.wikipedia.org, but not
* en.wikipedia.org, wiktionary.org, en.wiktionary.org, us.en.wikipedia.org,
* etc.
*/
$wgNoFollowDomainExceptions = array();
/**
* Allow DISPLAYTITLE to change title display
*/
$wgAllowDisplayTitle = true;
/**
* For consistency, restrict DISPLAYTITLE to titles that normalize to the same
* canonical DB key.
*/
$wgRestrictDisplayTitle = true;
/**
* Maximum number of calls per parse to expensive parser functions such as
* PAGESINCATEGORY.
*/
$wgExpensiveParserFunctionLimit = 100;
/**
* Preprocessor caching threshold
* Setting it to 'false' will disable the preprocessor cache.
*/
$wgPreprocessorCacheThreshold = 1000;
/**
* Enable interwiki transcluding. Only when iw_trans=1.
*/
$wgEnableScaryTranscluding = false;
/**
* (see next option $wgGlobalDatabase).
*/
$wgTranscludeCacheExpiry = 3600;
/** @} */ # end of parser settings }
/************************************************************************//**
* @name Statistics
* @{
*/
/**
* Method used to determine if a page in a content namespace should be counted
* as a valid article.
*
* Redirect pages will never be counted as valid articles.
*
* This variable can have the following values:
* - 'any': all pages as considered as valid articles
* - 'comma': the page must contain a comma to be considered valid
* - 'link': the page must contain a [[wiki link]] to be considered valid
* - null: the value will be set at run time depending on $wgUseCommaCount:
* if $wgUseCommaCount is false, it will be 'link', if it is true
* it will be 'comma'
*
* See also See http://www.mediawiki.org/wiki/Manual:Article_count
*
* Retroactively changing this variable will not affect the existing count,
* to update it, you will need to run the maintenance/updateArticleCount.php
* script.
*/
$wgArticleCountMethod = null;
/**
* Backward compatibility setting, will set $wgArticleCountMethod if it is null.
* @deprecated since 1.18; use $wgArticleCountMethod instead
*/
$wgUseCommaCount = false;
/**
* wgHitcounterUpdateFreq sets how often page counters should be updated, higher
* values are easier on the database. A value of 1 causes the counters to be
* updated on every hit, any higher value n cause them to update *on average*
* every n hits. Should be set to either 1 or something largish, eg 1000, for
* maximum efficiency.
*/
$wgHitcounterUpdateFreq = 1;
/**
* How many days user must be idle before he is considered inactive. Will affect
* the number shown on Special:Statistics and Special:ActiveUsers special page.
* You might want to leave this as the default value, to provide comparable
* numbers between different wikis.
*/
$wgActiveUserDays = 30;
/** @} */ # End of statistics }
/************************************************************************//**
* @name User accounts, authentication
* @{
*/
/** For compatibility with old installations set to false */
$wgPasswordSalt = true;
/**
* Specifies the minimal length of a user password. If set to 0, empty pass-
* words are allowed.
*/
$wgMinimalPasswordLength = 1;
/**
* Whether to allow password resets ("enter some identifying data, and we'll send an email
* with a temporary password you can use to get back into the account") identified by
* various bits of data. Setting all of these to false (or the whole variable to false)
* has the effect of disabling password resets entirely
*/
$wgPasswordResetRoutes = array(
'username' => true,
'email' => false,
);
/**
* Maximum number of Unicode characters in signature
*/
$wgMaxSigChars = 255;
/**
* Maximum number of bytes in username. You want to run the maintenance
* script ./maintenance/checkUsernames.php once you have changed this value.
*/
$wgMaxNameChars = 255;
/**
* Array of usernames which may not be registered or logged in from
* Maintenance scripts can still use these
*/
$wgReservedUsernames = array(
'MediaWiki default', // Default 'Main Page' and MediaWiki: message pages
'Conversion script', // Used for the old Wikipedia software upgrade
'Maintenance script', // Maintenance scripts which perform editing, image import script
'Template namespace initialisation script', // Used in 1.2->1.3 upgrade
'ScriptImporter', // Default user name used by maintenance/importSiteScripts.php
'msg:double-redirect-fixer', // Automatic double redirect fix
'msg:usermessage-editor', // Default user for leaving user messages
'msg:proxyblocker', // For Special:Blockme
);
/**
* Settings added to this array will override the default globals for the user
* preferences used by anonymous visitors and newly created accounts.
* For instance, to disable section editing links:
* $wgDefaultUserOptions ['editsection'] = 0;
*
*/
$wgDefaultUserOptions = array(
'ccmeonemails' => 0,
'cols' => 80,
'date' => 'default',
'diffonly' => 0,
'disablemail' => 0,
'disablesuggest' => 0,
'editfont' => 'default',
'editondblclick' => 0,
'editsection' => 1,
'editsectiononrightclick' => 0,
'enotifminoredits' => 0,
'enotifrevealaddr' => 0,
'enotifusertalkpages' => 1,
'enotifwatchlistpages' => 0,
'extendwatchlist' => 0,
'externaldiff' => 0,
'externaleditor' => 0,
'fancysig' => 0,
'forceeditsummary' => 0,
'gender' => 'unknown',
'hideminor' => 0,
'hidepatrolled' => 0,
'imagesize' => 2,
'justify' => 0,
'math' => 1,
'minordefault' => 0,
'newpageshidepatrolled' => 0,
'nocache' => 0,
'noconvertlink' => 0,
'norollbackdiff' => 0,
'numberheadings' => 0,
'previewonfirst' => 0,
'previewontop' => 1,
'quickbar' => 5,
'rcdays' => 7,
'rclimit' => 50,
'rememberpassword' => 0,
'rows' => 25,
'searchlimit' => 20,
'showhiddencats' => 0,
'showjumplinks' => 1,
'shownumberswatching' => 1,
'showtoc' => 1,
'showtoolbar' => 1,
'skin' => false,
'stubthreshold' => 0,
'thumbsize' => 2,
'underline' => 2,
'uselivepreview' => 0,
'usenewrc' => 0,
'watchcreations' => 0,
'watchdefault' => 0,
'watchdeletion' => 0,
'watchlistdays' => 3.0,
'watchlisthideanons' => 0,
'watchlisthidebots' => 0,
'watchlisthideliu' => 0,
'watchlisthideminor' => 0,
'watchlisthideown' => 0,
'watchlisthidepatrolled' => 0,
'watchmoves' => 0,
'wllimit' => 250,
);
/** An array of preferences to not show for the user */
$wgHiddenPrefs = array();
/**
* Characters to prevent during new account creations.
* This is used in a regular expression character class during
* registration (regex metacharacters like / are escaped).
*/
$wgInvalidUsernameCharacters = '@';
/**
* Character used as a delimiter when testing for interwiki userrights
* (In Special:UserRights, it is possible to modify users on different
* databases if the delimiter is used, e.g. "Someuser@enwiki").
*
* It is recommended that you have this delimiter in
* $wgInvalidUsernameCharacters above, or you will not be able to
* modify the user rights of those users via Special:UserRights
*/
$wgUserrightsInterwikiDelimiter = '@';
/**
* Use some particular type of external authentication. The specific
* authentication module you use will normally require some extra settings to
* be specified.
*
* null indicates no external authentication is to be used. Otherwise,
* $wgExternalAuthType must be the name of a non-abstract class that extends
* ExternalUser.
*
* Core authentication modules can be found in includes/extauth/.
*/
$wgExternalAuthType = null;
/**
* Configuration for the external authentication. This may include arbitrary
* keys that depend on the authentication mechanism. For instance,
* authentication against another web app might require that the database login
* info be provided. Check the file where your auth mechanism is defined for
* info on what to put here.
*/
$wgExternalAuthConf = array();
/**
* When should we automatically create local accounts when external accounts
* already exist, if using ExternalAuth? Can have three values: 'never',
* 'login', 'view'. 'view' requires the external database to support cookies,
* and implies 'login'.
*
* TODO: Implement 'view' (currently behaves like 'login').
*/
$wgAutocreatePolicy = 'login';
/**
* Policies for how each preference is allowed to be changed, in the presence
* of external authentication. The keys are preference keys, e.g., 'password'
* or 'emailaddress' (see Preferences.php et al.). The value can be one of the
* following:
*
* - local: Allow changes to this pref through the wiki interface but only
* apply them locally (default).
* - semiglobal: Allow changes through the wiki interface and try to apply them
* to the foreign database, but continue on anyway if that fails.
* - global: Allow changes through the wiki interface, but only let them go
* through if they successfully update the foreign database.
* - message: Allow no local changes for linked accounts; replace the change
* form with a message provided by the auth plugin, telling the user how to
* change the setting externally (maybe providing a link, etc.). If the auth
* plugin provides no message for this preference, hide it entirely.
*
* Accounts that are not linked to an external account are never affected by
* this setting. You may want to look at $wgHiddenPrefs instead.
* $wgHiddenPrefs supersedes this option.
*
* TODO: Implement message, global.
*/
$wgAllowPrefChange = array();
/**
* This is to let user authenticate using https when they come from http.
* Based on an idea by George Herbert on wikitech-l:
* http://lists.wikimedia.org/pipermail/wikitech-l/2010-October/050039.html
* @since 1.17
*/
$wgSecureLogin = false;
/**
* By default, keep users logged in via HTTPS when $wgSecureLogin is also
* true. Users opt-out of HTTPS when they login by de-selecting the checkbox.
* @since 1.21
*/
$wgSecureLoginDefaultHTTPS = true;
/** @} */ # end user accounts }
/************************************************************************//**
* @name User rights, access control and monitoring
* @{
*/
/**
* Number of seconds before autoblock entries expire. Default 86400 = 1 day.
*/
$wgAutoblockExpiry = 86400;
/**
* Set this to true to allow blocked users to edit their own user talk page.
*/
$wgBlockAllowsUTEdit = false;
/** Allow sysops to ban users from accessing Emailuser */
$wgSysopEmailBans = true;
/**
* Limits on the possible sizes of range blocks.
*
* CIDR notation is hard to understand, it's easy to mistakenly assume that a
* /1 is a small range and a /31 is a large range. For IPv4, setting a limit of
* half the number of bits avoids such errors, and allows entire ISPs to be
* blocked using a small number of range blocks.
*
* For IPv6, RFC 3177 recommends that a /48 be allocated to every residential
* customer, so range blocks larger than /64 (half the number of bits) will
* plainly be required. RFC 4692 implies that a very large ISP may be
* allocated a /19 if a generous HD-Ratio of 0.8 is used, so we will use that
* as our limit. As of 2012, blocking the whole world would require a /4 range.
*/
$wgBlockCIDRLimit = array(
'IPv4' => 16, # Blocks larger than a /16 (64k addresses) will not be allowed
'IPv6' => 19,
);
/**
* If true, blocked users will not be allowed to login. When using this with
* a public wiki, the effect of logging out blocked users may actually be
* avers: unless the user's address is also blocked (e.g. auto-block),
* logging the user out will again allow reading and editing, just as for
* anonymous visitors.
*/
$wgBlockDisablesLogin = false;
/**
* Pages anonymous user may see, set as an array of pages titles.
*
* @par Example:
* @code
* $wgWhitelistRead = array ( "Main Page", "Wikipedia:Help");
* @endcode
*
* Special:Userlogin and Special:ChangePassword are always whitelisted.
*
* @note This will only work if $wgGroupPermissions['*']['read'] is false --
* see below. Otherwise, ALL pages are accessible, regardless of this setting.
*
* @note Also that this will only protect _pages in the wiki_. Uploaded files
* will remain readable. You can use img_auth.php to protect uploaded files,
* see http://www.mediawiki.org/wiki/Manual:Image_Authorization
*/
$wgWhitelistRead = false;
/**
* Pages anonymous user may see, set as an array of regular expressions.
*
* This function will match the regexp against the title name, which
* is without underscore.
*
* @par Example:
* To whitelist [[Main Page]]:
* @code
* $wgWhitelistReadRegexp = array( "/Main Page/" );
* @endcode
*
* @note Unless ^ and/or $ is specified, a regular expression might match
* pages not intended to be whitelisted. The above example will also
* whitelist a page named 'Security Main Page'.
*
* @par Example:
* To allow reading any page starting with 'User' regardless of the case:
* @code
* $wgWhitelistReadRegexp = array( "@^UsEr.*@i" );
* @endcode
* Will allow both [[User is banned]] and [[User:JohnDoe]]
*
* @note This will only work if $wgGroupPermissions['*']['read'] is false --
* see below. Otherwise, ALL pages are accessible, regardless of this setting.
*/
$wgWhitelistReadRegexp = false;
/**
* Should editors be required to have a validated e-mail
* address before being allowed to edit?
*/
$wgEmailConfirmToEdit = false;
/**
* Permission keys given to users in each group.
*
* This is an array where the keys are all groups and each value is an
* array of the format (right => boolean).
*
* The second format is used to support per-namespace permissions.
* Note that this feature does not fully work for all permission types.
*
* All users are implicitly in the '*' group including anonymous visitors;
* logged-in users are all implicitly in the 'user' group. These will be
* combined with the permissions of all groups that a given user is listed
* in in the user_groups table.
*
* Note: Don't set $wgGroupPermissions = array(); unless you know what you're
* doing! This will wipe all permissions, and may mean that your users are
* unable to perform certain essential tasks or access new functionality
* when new permissions are introduced and default grants established.
*
* Functionality to make pages inaccessible has not been extensively tested
* for security. Use at your own risk!
*
* This replaces $wgWhitelistAccount and $wgWhitelistEdit
*/
$wgGroupPermissions = array();
/** @cond file_level_code */
// Implicit group for all visitors
$wgGroupPermissions['*']['createaccount'] = true;
$wgGroupPermissions['*']['read'] = true;
$wgGroupPermissions['*']['edit'] = true;
$wgGroupPermissions['*']['createpage'] = true;
$wgGroupPermissions['*']['createtalk'] = true;
$wgGroupPermissions['*']['writeapi'] = true;
#$wgGroupPermissions['*']['patrolmarks'] = false; // let anons see what was patrolled
// Implicit group for all logged-in accounts
$wgGroupPermissions['user']['move'] = true;
$wgGroupPermissions['user']['move-subpages'] = true;
$wgGroupPermissions['user']['move-rootuserpages'] = true; // can move root userpages
$wgGroupPermissions['user']['movefile'] = true;
$wgGroupPermissions['user']['read'] = true;
$wgGroupPermissions['user']['edit'] = true;
$wgGroupPermissions['user']['createpage'] = true;
$wgGroupPermissions['user']['createtalk'] = true;
$wgGroupPermissions['user']['writeapi'] = true;
$wgGroupPermissions['user']['upload'] = true;
$wgGroupPermissions['user']['reupload'] = true;
$wgGroupPermissions['user']['reupload-shared'] = true;
$wgGroupPermissions['user']['minoredit'] = true;
$wgGroupPermissions['user']['purge'] = true; // can use ?action=purge without clicking "ok"
$wgGroupPermissions['user']['sendemail'] = true;
// Implicit group for accounts that pass $wgAutoConfirmAge
$wgGroupPermissions['autoconfirmed']['autoconfirmed'] = true;
// Users with bot privilege can have their edits hidden
// from various log pages by default
$wgGroupPermissions['bot']['bot'] = true;
$wgGroupPermissions['bot']['autoconfirmed'] = true;
$wgGroupPermissions['bot']['nominornewtalk'] = true;
$wgGroupPermissions['bot']['autopatrol'] = true;
$wgGroupPermissions['bot']['suppressredirect'] = true;
$wgGroupPermissions['bot']['apihighlimits'] = true;
$wgGroupPermissions['bot']['writeapi'] = true;
#$wgGroupPermissions['bot']['editprotected'] = true; // can edit all protected pages without cascade protection enabled
// Most extra permission abilities go to this group
$wgGroupPermissions['sysop']['block'] = true;
$wgGroupPermissions['sysop']['createaccount'] = true;
$wgGroupPermissions['sysop']['delete'] = true;
$wgGroupPermissions['sysop']['bigdelete'] = true; // can be separately configured for pages with > $wgDeleteRevisionsLimit revs
$wgGroupPermissions['sysop']['deletedhistory'] = true; // can view deleted history entries, but not see or restore the text
$wgGroupPermissions['sysop']['deletedtext'] = true; // can view deleted revision text
$wgGroupPermissions['sysop']['undelete'] = true;
$wgGroupPermissions['sysop']['editinterface'] = true;
$wgGroupPermissions['sysop']['editusercss'] = true;
$wgGroupPermissions['sysop']['edituserjs'] = true;
$wgGroupPermissions['sysop']['import'] = true;
$wgGroupPermissions['sysop']['importupload'] = true;
$wgGroupPermissions['sysop']['move'] = true;
$wgGroupPermissions['sysop']['move-subpages'] = true;
$wgGroupPermissions['sysop']['move-rootuserpages'] = true;
$wgGroupPermissions['sysop']['patrol'] = true;
$wgGroupPermissions['sysop']['autopatrol'] = true;
$wgGroupPermissions['sysop']['protect'] = true;
$wgGroupPermissions['sysop']['proxyunbannable'] = true;
$wgGroupPermissions['sysop']['rollback'] = true;
$wgGroupPermissions['sysop']['upload'] = true;
$wgGroupPermissions['sysop']['reupload'] = true;
$wgGroupPermissions['sysop']['reupload-shared'] = true;
$wgGroupPermissions['sysop']['unwatchedpages'] = true;
$wgGroupPermissions['sysop']['autoconfirmed'] = true;
$wgGroupPermissions['sysop']['ipblock-exempt'] = true;
$wgGroupPermissions['sysop']['blockemail'] = true;
$wgGroupPermissions['sysop']['markbotedits'] = true;
$wgGroupPermissions['sysop']['apihighlimits'] = true;
$wgGroupPermissions['sysop']['browsearchive'] = true;
$wgGroupPermissions['sysop']['noratelimit'] = true;
$wgGroupPermissions['sysop']['movefile'] = true;
$wgGroupPermissions['sysop']['unblockself'] = true;
$wgGroupPermissions['sysop']['suppressredirect'] = true;
#$wgGroupPermissions['sysop']['upload_by_url'] = true;
#$wgGroupPermissions['sysop']['mergehistory'] = true;
// Permission to change users' group assignments
$wgGroupPermissions['bureaucrat']['userrights'] = true;
$wgGroupPermissions['bureaucrat']['noratelimit'] = true;
// Permission to change users' groups assignments across wikis
#$wgGroupPermissions['bureaucrat']['userrights-interwiki'] = true;
// Permission to export pages including linked pages regardless of $wgExportMaxLinkDepth
#$wgGroupPermissions['bureaucrat']['override-export-depth'] = true;
#$wgGroupPermissions['sysop']['deletelogentry'] = true;
#$wgGroupPermissions['sysop']['deleterevision'] = true;
// To hide usernames from users and Sysops
#$wgGroupPermissions['suppress']['hideuser'] = true;
// To hide revisions/log items from users and Sysops
#$wgGroupPermissions['suppress']['suppressrevision'] = true;
// For private suppression log access
#$wgGroupPermissions['suppress']['suppressionlog'] = true;
/**
* The developer group is deprecated, but can be activated if need be
* to use the 'lockdb' and 'unlockdb' special pages. Those require
* that a lock file be defined and creatable/removable by the web
* server.
*/
# $wgGroupPermissions['developer']['siteadmin'] = true;
/** @endcond */
/**
* Permission keys revoked from users in each group.
*
* This acts the same way as wgGroupPermissions above, except that
* if the user is in a group here, the permission will be removed from them.
*
* Improperly setting this could mean that your users will be unable to perform
* certain essential tasks, so use at your own risk!
*/
$wgRevokePermissions = array();
/**
* Implicit groups, aren't shown on Special:Listusers or somewhere else
*/
$wgImplicitGroups = array( '*', 'user', 'autoconfirmed' );
/**
* A map of group names that the user is in, to group names that those users
* are allowed to add or revoke.
*
* Setting the list of groups to add or revoke to true is equivalent to "any
* group".
*
* @par Example:
* To allow sysops to add themselves to the "bot" group:
* @code
* $wgGroupsAddToSelf = array( 'sysop' => array( 'bot' ) );
* @endcode
*
* @par Example:
* Implicit groups may be used for the source group, for instance:
* @code
* $wgGroupsRemoveFromSelf = array( '*' => true );
* @endcode
* This allows users in the '*' group (i.e. any user) to remove themselves from
* any group that they happen to be in.
*
*/
$wgGroupsAddToSelf = array();
/** @see $wgGroupsAddToSelf */
$wgGroupsRemoveFromSelf = array();
/**
* Set of available actions that can be restricted via action=protect
* You probably shouldn't change this.
* Translated through restriction-* messages.
* Title::getRestrictionTypes() will remove restrictions that are not
* applicable to a specific title (create and upload)
*/
$wgRestrictionTypes = array( 'create', 'edit', 'move', 'upload' );
/**
* Rights which can be required for each protection level (via action=protect)
*
* You can add a new protection level that requires a specific
* permission by manipulating this array. The ordering of elements
* dictates the order on the protection form's lists.
*
* - '' will be ignored (i.e. unprotected)
* - 'sysop' is quietly rewritten to 'protect' for backwards compatibility
*/
$wgRestrictionLevels = array( '', 'autoconfirmed', 'sysop' );
/**
* Set the minimum permissions required to edit pages in each
* namespace. If you list more than one permission, a user must
* have all of them to edit pages in that namespace.
*
* @note NS_MEDIAWIKI is implicitly restricted to 'editinterface'.
*/
$wgNamespaceProtection = array();
/**
* Pages in namespaces in this array can not be used as templates.
*
* Elements MUST be numeric namespace ids, you can safely use the MediaWiki
* namespaces constants (NS_USER, NS_MAIN...).
*
* Among other things, this may be useful to enforce read-restrictions
* which may otherwise be bypassed by using the template mechanism.
*/
$wgNonincludableNamespaces = array();
/**
* Number of seconds an account is required to age before it's given the
* implicit 'autoconfirm' group membership. This can be used to limit
* privileges of new accounts.
*
* Accounts created by earlier versions of the software may not have a
* recorded creation date, and will always be considered to pass the age test.
*
* When left at 0, all registered accounts will pass.
*
* @par Example:
* Set automatic confirmation to 10 minutes (which is 600 seconds):
* @code
* $wgAutoConfirmAge = 600; // ten minutes
* @endcode
* Set age to one day:
* @code
* $wgAutoConfirmAge = 3600*24; // one day
* @endcode
*/
$wgAutoConfirmAge = 0;
/**
* Number of edits an account requires before it is autoconfirmed.
* Passing both this AND the time requirement is needed. Example:
*
* @par Example:
* @code
* $wgAutoConfirmCount = 50;
* @endcode
*/
$wgAutoConfirmCount = 0;
/**
* Automatically add a usergroup to any user who matches certain conditions.
*
* @todo Redocument $wgAutopromote
*
* The format is
* array( '&' or '|' or '^' or '!', cond1, cond2, ... )
* where cond1, cond2, ... are themselves conditions; *OR*
* APCOND_EMAILCONFIRMED, *OR*
* array( APCOND_EMAILCONFIRMED ), *OR*
* array( APCOND_EDITCOUNT, number of edits ), *OR*
* array( APCOND_AGE, seconds since registration ), *OR*
* array( APCOND_INGROUPS, group1, group2, ... ), *OR*
* array( APCOND_ISIP, ip ), *OR*
* array( APCOND_IPINRANGE, range ), *OR*
* array( APCOND_AGE_FROM_EDIT, seconds since first edit ), *OR*
* array( APCOND_BLOCKED ), *OR*
* array( APCOND_ISBOT ), *OR*
* similar constructs defined by extensions.
*
* If $wgEmailAuthentication is off, APCOND_EMAILCONFIRMED will be true for any
* user who has provided an e-mail address.
*/
$wgAutopromote = array(
'autoconfirmed' => array( '&',
array( APCOND_EDITCOUNT, &$wgAutoConfirmCount ),
array( APCOND_AGE, &$wgAutoConfirmAge ),
),
);
/**
* Automatically add a usergroup to any user who matches certain conditions.
*
* Does not add the user to the group again if it has been removed.
* Also, does not remove the group if the user no longer meets the criteria.
*
* The format is:
* @code
* array( event => criteria, ... )
* @endcode
* Where event is either:
* - 'onEdit' (when user edits)
* - 'onView' (when user views the wiki)
*
* Criteria has the same format as $wgAutopromote
*
* @see $wgAutopromote
* @since 1.18
*/
$wgAutopromoteOnce = array(
'onEdit' => array(),
'onView' => array()
);
/**
* Put user rights log entries for autopromotion in recent changes?
* @since 1.18
*/
$wgAutopromoteOnceLogInRC = true;
/**
* $wgAddGroups and $wgRemoveGroups can be used to give finer control over who
* can assign which groups at Special:Userrights.
*
* @par Example:
* Bureaucrats can add any group:
* @code
* $wgAddGroups['bureaucrat'] = true;
* @endcode
* Bureaucrats can only remove bots and sysops:
* @code
* $wgRemoveGroups['bureaucrat'] = array( 'bot', 'sysop' );
* @endcode
* Sysops can make bots:
* @code
* $wgAddGroups['sysop'] = array( 'bot' );
* @endcode
* Sysops can disable other sysops in an emergency, and disable bots:
* @code
* $wgRemoveGroups['sysop'] = array( 'sysop', 'bot' );
* @endcode
*/
$wgAddGroups = array();
/** @see $wgAddGroups */
$wgRemoveGroups = array();
/**
* A list of available rights, in addition to the ones defined by the core.
* For extensions only.
*/
$wgAvailableRights = array();
/**
* Optional to restrict deletion of pages with higher revision counts
* to users with the 'bigdelete' permission. (Default given to sysops.)
*/
$wgDeleteRevisionsLimit = 0;
/**
* Number of accounts each IP address may create, 0 to disable.
*
* @warning Requires memcached
*/
$wgAccountCreationThrottle = 0;
/**
* Edits matching these regular expressions in body text
* will be recognised as spam and rejected automatically.
*
* There's no administrator override on-wiki, so be careful what you set. :)
* May be an array of regexes or a single string for backwards compatibility.
*
* @see http://en.wikipedia.org/wiki/Regular_expression
*
* @note Each regex needs a beginning/end delimiter, eg: # or /
*/
$wgSpamRegex = array();
/** Same as the above except for edit summaries */
$wgSummarySpamRegex = array();
/**
* Whether to use DNS blacklists in $wgDnsBlacklistUrls to check for open
* proxies
* @since 1.16
*/
$wgEnableDnsBlacklist = false;
/**
* @deprecated since 1.17 Use $wgEnableDnsBlacklist instead, only kept for
* backward compatibility.
*/
$wgEnableSorbs = false;
/**
* List of DNS blacklists to use, if $wgEnableDnsBlacklist is true.
*
* This is an array of either a URL or an array with the URL and a key (should
* the blacklist require a key).
*
* @par Example:
* @code
* $wgDnsBlacklistUrls = array(
* // String containing URL
* 'http.dnsbl.sorbs.net.',
* // Array with URL and key, for services that require a key
* array( 'dnsbl.httpbl.net.', 'mykey' ),
* // Array with just the URL. While this works, it is recommended that you
* // just use a string as shown above
* array( 'opm.tornevall.org.' )
* );
* @endcode
*
* @note You should end the domain name with a . to avoid searching your
* eventual domain search suffixes.
* @since 1.16
*/
$wgDnsBlacklistUrls = array( 'http.dnsbl.sorbs.net.' );
/**
* @deprecated since 1.17 Use $wgDnsBlacklistUrls instead, only kept for
* backward compatibility.
*/
$wgSorbsUrl = array();
/**
* Proxy whitelist, list of addresses that are assumed to be non-proxy despite
* what the other methods might say.
*/
$wgProxyWhitelist = array();
/**
* Simple rate limiter options to brake edit floods.
*
* Maximum number actions allowed in the given number of seconds; after that
* the violating client receives HTTP 500 error pages until the period
* elapses.
*
* @par Example:
* To set a generic maximum of 4 hits in 60 seconds:
* @code
* $wgRateLimits = array( 4, 60 );
* @endcode
*
* You could also limit per action and then type of users. See the inline
* code for a template to use.
*
* This option set is experimental and likely to change.
*
* @warning Requires memcached.
*/
$wgRateLimits = array(
'edit' => array(
'anon' => null, // for any and all anonymous edits (aggregate)
'user' => null, // for each logged-in user
'newbie' => null, // for each recent (autoconfirmed) account; overrides 'user'
'ip' => null, // for each anon and recent account
'subnet' => null, // ... with final octet removed
),
'move' => array(
'user' => null,
'newbie' => null,
'ip' => null,
'subnet' => null,
),
'mailpassword' => array(
'anon' => null,
),
'emailuser' => array(
'user' => null,
),
);
/**
* Set to a filename to log rate limiter hits.
*/
$wgRateLimitLog = null;
/**
* Array of IPs which should be excluded from rate limits.
* This may be useful for whitelisting NAT gateways for conferences, etc.
*/
$wgRateLimitsExcludedIPs = array();
/**
* Log IP addresses in the recentchanges table; can be accessed only by
* extensions (e.g. CheckUser) or a DB admin
* Used for retroactive autoblocks
*/
$wgPutIPinRC = true;
/**
* Integer defining default number of entries to show on
* special pages which are query-pages such as Special:Whatlinkshere.
*/
$wgQueryPageDefaultLimit = 50;
/**
* Limit password attempts to X attempts per Y seconds per IP per account.
*
* @warning Requires memcached.
*/
$wgPasswordAttemptThrottle = array( 'count' => 5, 'seconds' => 300 );
/** @} */ # end of user rights settings
/************************************************************************//**
* @name Proxy scanner settings
* @{
*/
/**
* If you enable this, every editor's IP address will be scanned for open HTTP
* proxies.
*
* @warning Don't enable this. Many sysops will report "hostile TCP port scans"
* to your ISP and ask for your server to be shut down.
* You have been warned.
*
*/
$wgBlockOpenProxies = false;
/** Port we want to scan for a proxy */
$wgProxyPorts = array( 80, 81, 1080, 3128, 6588, 8000, 8080, 8888, 65506 );
/** Script used to scan */
$wgProxyScriptPath = "$IP/maintenance/proxyCheck.php";
/** */
$wgProxyMemcExpiry = 86400;
/** This should always be customised in LocalSettings.php */
$wgSecretKey = false;
/**
* Big list of banned IP addresses.
*
* This can have the following formats:
* - An array of addresses, either in the values
* or the keys (for backward compatibility)
* - A string, in that case this is the path to a file
* containing the list of IP addresses, one per line
*/
$wgProxyList = array();
/**
* @deprecated since 1.14
*/
$wgProxyKey = false;
/** @} */ # end of proxy scanner settings
/************************************************************************//**
* @name Cookie settings
* @{
*/
/**
* Default cookie expiration time. Setting to 0 makes all cookies session-only.
*/
$wgCookieExpiration = 180 * 86400;
/**
* Set to set an explicit domain on the login cookies eg, "justthis.domain.org"
* or ".any.subdomain.net"
*/
$wgCookieDomain = '';
/**
* Set this variable if you want to restrict cookies to a certain path within
* the domain specified by $wgCookieDomain.
*/
$wgCookiePath = '/';
/**
* Whether the "secure" flag should be set on the cookie. This can be:
* - true: Set secure flag
* - false: Don't set secure flag
* - "detect": Set the secure flag if $wgServer is set to an HTTPS URL
*/
$wgCookieSecure = 'detect';
/**
* By default, MediaWiki checks if the client supports cookies during the
* login process, so that it can display an informative error message if
* cookies are disabled. Set this to true if you want to disable this cookie
* check.
*/
$wgDisableCookieCheck = false;
/**
* Cookies generated by MediaWiki have names starting with this prefix. Set it
* to a string to use a custom prefix. Setting it to false causes the database
* name to be used as a prefix.
*/
$wgCookiePrefix = false;
/**
* Set authentication cookies to HttpOnly to prevent access by JavaScript,
* in browsers that support this feature. This can mitigates some classes of
* XSS attack.
*/
$wgCookieHttpOnly = true;
/**
* If the requesting browser matches a regex in this blacklist, we won't
* send it cookies with HttpOnly mode, even if $wgCookieHttpOnly is on.
*/
$wgHttpOnlyBlacklist = array(
// Internet Explorer for Mac; sometimes the cookies work, sometimes
// they don't. It's difficult to predict, as combinations of path
// and expiration options affect its parsing.
'/^Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/',
);
/** A list of cookies that vary the cache (for use by extensions) */
$wgCacheVaryCookies = array();
/** Override to customise the session name */
$wgSessionName = false;
/** @} */ # end of cookie settings }
/************************************************************************//**
* @name LaTeX (mathematical formulas)
* @{
*/
/**
* To use inline TeX, you need to compile 'texvc' (in the 'math' subdirectory of
* the MediaWiki package and have latex, dvips, gs (ghostscript), andconvert
* (ImageMagick) installed and available in the PATH.
* Please see math/README for more information.
*/
$wgUseTeX = false;
/* @} */ # end LaTeX }
/************************************************************************//**
* @name Profiling, testing and debugging
*
* To enable profiling, edit StartProfiler.php
*
* @{
*/
/**
* Filename for debug logging. See http://www.mediawiki.org/wiki/How_to_debug
* The debug log file should be not be publicly accessible if it is used, as it
* may contain private data.
*/
$wgDebugLogFile = '';
/**
* Prefix for debug log lines
*/
$wgDebugLogPrefix = '';
/**
* If true, instead of redirecting, show a page with a link to the redirect
* destination. This allows for the inspection of PHP error messages, and easy
* resubmission of form data. For developer use only.
*/
$wgDebugRedirects = false;
/**
* If true, log debugging data from action=raw and load.php.
* This is normally false to avoid overlapping debug entries due to gen=css
* and gen=js requests.
*/
$wgDebugRawPage = false;
/**
* Send debug data to an HTML comment in the output.
*
* This may occasionally be useful when supporting a non-technical end-user.
* It's more secure than exposing the debug log file to the web, since the
* output only contains private data for the current user. But it's not ideal
* for development use since data is lost on fatal errors and redirects.
*/
$wgDebugComments = false;
/**
* Extensive database transaction state debugging
*
* @since 1.20
*/
$wgDebugDBTransactions = false;
/**
* Write SQL queries to the debug log
*/
$wgDebugDumpSql = false;
/**
* Set to an array of log group keys to filenames.
* If set, wfDebugLog() output for that group will go to that file instead
* of the regular $wgDebugLogFile. Useful for enabling selective logging
* in production.
*/
$wgDebugLogGroups = array();
/**
* Display debug data at the bottom of the main content area.
*
* Useful for developers and technical users trying to working on a closed wiki.
*/
$wgShowDebug = false;
/**
* Prefix debug messages with relative timestamp. Very-poor man's profiler.
* Since 1.19 also includes memory usage.
*/
$wgDebugTimestamps = false;
/**
* Print HTTP headers for every request in the debug information.
*/
$wgDebugPrintHttpHeaders = true;
/**
* Show the contents of $wgHooks in Special:Version
*/
$wgSpecialVersionShowHooks = false;
/**
* Whether to show "we're sorry, but there has been a database error" pages.
* Displaying errors aids in debugging, but may display information useful
* to an attacker.
*/
$wgShowSQLErrors = false;
/**
* If set to true, uncaught exceptions will print a complete stack trace
* to output. This should only be used for debugging, as it may reveal
* private information in function parameters due to PHP's backtrace
* formatting.
*/
$wgShowExceptionDetails = false;
/**
* If true, show a backtrace for database errors
*/
$wgShowDBErrorBacktrace = false;
/**
* If true, send the exception backtrace to the error log
*/
$wgLogExceptionBacktrace = true;
/**
* Expose backend server host names through the API and various HTML comments
*/
$wgShowHostnames = false;
/**
* Override server hostname detection with a hardcoded value.
* Should be a string, default false.
* @since 1.20
*/
$wgOverrideHostname = false;
/**
* If set to true MediaWiki will throw notices for some possible error
* conditions and for deprecated functions.
*/
$wgDevelopmentWarnings = false;
/**
* Release limitation to wfDeprecated warnings, if set to a release number
* development warnings will not be generated for deprecations added in releases
* after the limit.
*/
$wgDeprecationReleaseLimit = false;
/** Only record profiling info for pages that took longer than this */
$wgProfileLimit = 0.0;
/** Don't put non-profiling info into log file */
$wgProfileOnly = false;
/**
* Log sums from profiling into "profiling" table in db.
*
* You have to create a 'profiling' table in your database before using
* this feature. Run set $wgProfileToDatabase to true in
* LocalSettings.php and run maintenance/update.php or otherwise
* manually add patch-profiling.sql to your database.
*
* To enable profiling, edit StartProfiler.php
*/
$wgProfileToDatabase = false;
/** If true, print a raw call tree instead of per-function report */
$wgProfileCallTree = false;
/** Should application server host be put into profiling table */
$wgProfilePerHost = false;
/**
* Host for UDP profiler.
*
* The host should be running a daemon which can be obtained from MediaWiki
* Subversion at: http://svn.wikimedia.org/svnroot/mediawiki/trunk/udpprofile
*/
$wgUDPProfilerHost = '127.0.0.1';
/**
* Port for UDP profiler.
* @see $wgUDPProfilerHost
*/
$wgUDPProfilerPort = '3811';
/** Detects non-matching wfProfileIn/wfProfileOut calls */
$wgDebugProfiling = false;
/** Output debug message on every wfProfileIn/wfProfileOut */
$wgDebugFunctionEntry = false;
/**
* Destination for wfIncrStats() data...
* 'cache' to go into the system cache, if enabled (memcached)
* 'udp' to be sent to the UDP profiler (see $wgUDPProfilerHost)
* false to disable
*/
$wgStatsMethod = 'cache';
/**
* When $wgStatsMethod is 'udp', setting this to a string allows statistics to
* be aggregated over more than one wiki. The string will be used in place of
* the DB name in outgoing UDP packets. If this is set to false, the DB name
* will be used.
*/
$wgAggregateStatsID = false;
/** Whereas to count the number of time an article is viewed.
* Does not work if pages are cached (for example with squid).
*/
$wgDisableCounters = false;
/**
* InfoAction retrieves a list of transclusion links (both to and from).
* This number puts a limit on that query in the case of highly transcluded
* templates.
*/
$wgPageInfoTransclusionLimit = 50;
/**
* Set this to an integer to only do synchronous site_stats updates
* one every *this many* updates. The other requests go into pending
* delta values in $wgMemc. Make sure that $wgMemc is a global cache.
* If set to -1, updates *only* go to $wgMemc (useful for daemons).
*/
$wgSiteStatsAsyncFactor = false;
/**
* Parser test suite files to be run by parserTests.php when no specific
* filename is passed to it.
*
* Extensions may add their own tests to this array, or site-local tests
* may be added via LocalSettings.php
*
* Use full paths.
*/
$wgParserTestFiles = array(
"$IP/tests/parser/parserTests.txt",
"$IP/tests/parser/extraParserTests.txt"
);
/**
* If configured, specifies target CodeReview installation to send test
* result data from 'parserTests.php --upload'
*
* Something like this:
* $wgParserTestRemote = array(
* 'api-url' => 'http://www.mediawiki.org/w/api.php',
* 'repo' => 'MediaWiki',
* 'suite' => 'ParserTests',
* 'path' => '/trunk/phase3', // not used client-side; for reference
* 'secret' => 'qmoicj3mc4mcklmqw', // Shared secret used in HMAC validation
* );
*/
$wgParserTestRemote = false;
/**
* Allow running of javascript test suites via [[Special:JavaScriptTest]] (such as QUnit).
*/
$wgEnableJavaScriptTest = false;
/**
* Configuration for javascript testing.
*/
$wgJavaScriptTestConfig = array(
'qunit' => array(
// Page where documentation can be found relevant to the QUnit test suite being ran.
// Used in the intro paragraph on [[Special:JavaScriptTest/qunit]] for the
// documentation link in the "javascripttest-qunit-intro" message.
'documentation' => '//www.mediawiki.org/wiki/Manual:JavaScript_unit_testing',
// If you are submitting the QUnit test suite to a TestSwarm instance,
// point this to the "inject.js" script of that instance. This is was registers
// the QUnit hooks to extract the test results and push them back up into the
// TestSwarm database.
// @example 'http://localhost/testswarm/js/inject.js'
// @example '//integration.mediawiki.org/testswarm/js/inject.js'
'testswarm-injectjs' => false,
),
);
/**
* Overwrite the caching key prefix with custom value.
* @since 1.19
*/
$wgCachePrefix = false;
/**
* Display the new debugging toolbar. This also enables profiling on database
* queries and other useful output.
* Will disable file cache.
*
* @since 1.19
*/
$wgDebugToolbar = false;
/** @} */ # end of profiling, testing and debugging }
/************************************************************************//**
* @name Search
* @{
*/
/**
* Set this to true to disable the full text search feature.
*/
$wgDisableTextSearch = false;
/**
* Set to true to have nicer highlighted text in search results,
* by default off due to execution overhead
*/
$wgAdvancedSearchHighlighting = false;
/**
* Regexp to match word boundaries, defaults for non-CJK languages
* should be empty for CJK since the words are not separate
*/
$wgSearchHighlightBoundaries = '[\p{Z}\p{P}\p{C}]';
/**
* Set to true to have the search engine count total
* search matches to present in the Special:Search UI.
* Not supported by every search engine shipped with MW.
*
* This could however be slow on larger wikis, and is pretty flaky
* with the current title vs content split. Recommend avoiding until
* that's been worked out cleanly; but this may aid in testing the
* search UI and API to confirm that the result count works.
*/
$wgCountTotalSearchHits = false;
/**
* Template for OpenSearch suggestions, defaults to API action=opensearch
*
* Sites with heavy load would typically have these point to a custom
* PHP wrapper to avoid firing up mediawiki for every keystroke
*
* Placeholders: {searchTerms}
*
*/
$wgOpenSearchTemplate = false;
/**
* Enable OpenSearch suggestions requested by MediaWiki. Set this to
* false if you've disabled scripts that use api?action=opensearch and
* want reduce load caused by cached scripts still pulling suggestions.
* It will let the API fallback by responding with an empty array.
*/
$wgEnableOpenSearchSuggest = true;
/**
* Expiry time for search suggestion responses
*/
$wgSearchSuggestCacheExpiry = 1200;
/**
* If you've disabled search semi-permanently, this also disables updates to the
* table. If you ever re-enable, be sure to rebuild the search table.
*/
$wgDisableSearchUpdate = false;
/**
* List of namespaces which are searched by default.
*
* @par Example:
* @code
* $wgNamespacesToBeSearchedDefault[NS_MAIN] = true;
* $wgNamespacesToBeSearchedDefault[NS_PROJECT] = true;
* @endcode
*/
$wgNamespacesToBeSearchedDefault = array(
NS_MAIN => true,
);
/**
* Namespaces to be searched when user clicks the "Help" tab
* on Special:Search.
*
* Same format as $wgNamespacesToBeSearchedDefault.
*/
$wgNamespacesToBeSearchedHelp = array(
NS_PROJECT => true,
NS_HELP => true,
);
/**
* If set to true the 'searcheverything' preference will be effective only for
* logged-in users.
* Useful for big wikis to maintain different search profiles for anonymous and
* logged-in users.
*
*/
$wgSearchEverythingOnlyLoggedIn = false;
/**
* Disable the internal MySQL-based search, to allow it to be
* implemented by an extension instead.
*/
$wgDisableInternalSearch = false;
/**
* Set this to a URL to forward search requests to some external location.
* If the URL includes '$1', this will be replaced with the URL-encoded
* search term.
*
* @par Example:
* To forward to Google you'd have something like:
* @code
* $wgSearchForwardUrl =
* 'http://www.google.com/search?q=$1' .
* '&domains=http://example.com' .
* '&sitesearch=http://example.com' .
* '&ie=utf-8&oe=utf-8';
* @endcode
*/
$wgSearchForwardUrl = null;
/**
* Search form behavior.
* - true = use Go & Search buttons
* - false = use Go button & Advanced search link
*/
$wgUseTwoButtonsSearchForm = true;
/**
* Array of namespaces to generate a Google sitemap for when the
* maintenance/generateSitemap.php script is run, or false if one is to be
* generated for all namespaces.
*/
$wgSitemapNamespaces = false;
/**
* Custom namespace priorities for sitemaps. Setting this will allow you to
* set custom priorities to namespaces when sitemaps are generated using the
* maintenance/generateSitemap.php script.
*
* This should be a map of namespace IDs to priority
* @par Example:
* @code
* $wgSitemapNamespacesPriorities = array(
* NS_USER => '0.9',
* NS_HELP => '0.0',
* );
* @endcode
*/
$wgSitemapNamespacesPriorities = false;
/**
* If true, searches for IP addresses will be redirected to that IP's
* contributions page. E.g. searching for "1.2.3.4" will redirect to
* [[Special:Contributions/1.2.3.4]]
*/
$wgEnableSearchContributorsByIP = true;
/** @} */ # end of search settings
/************************************************************************//**
* @name Edit user interface
* @{
*/
/**
* Path to the GNU diff3 utility. If the file doesn't exist, edit conflicts will
* fall back to the old behavior (no merging).
*/
$wgDiff3 = '/usr/bin/diff3';
/**
* Path to the GNU diff utility.
*/
$wgDiff = '/usr/bin/diff';
/**
* Which namespaces have special treatment where they should be preview-on-open
* Internally only Category: pages apply, but using this extensions (e.g. Semantic MediaWiki)
* can specify namespaces of pages they have special treatment for
*/
$wgPreviewOnOpenNamespaces = array(
NS_CATEGORY => true
);
/**
* Activate external editor interface for files and pages
* See http://www.mediawiki.org/wiki/Manual:External_editors
*/
$wgUseExternalEditor = true;
/** Go button goes straight to the edit screen if the article doesn't exist. */
$wgGoToEdit = false;
/**
* Enable the UniversalEditButton for browsers that support it
* (currently only Firefox with an extension)
* See http://universaleditbutton.org for more background information
*/
$wgUniversalEditButton = true;
/**
* If user doesn't specify any edit summary when making a an edit, MediaWiki
* will try to automatically create one. This feature can be disabled by set-
* ting this variable false.
*/
$wgUseAutomaticEditSummaries = true;
/** @} */ # end edit UI }
/************************************************************************//**
* @name Maintenance
* See also $wgSiteNotice
* @{
*/
/**
* @cond file_level_code
* Set $wgCommandLineMode if it's not set already, to avoid notices
*/
if ( !isset( $wgCommandLineMode ) ) {
$wgCommandLineMode = false;
}
/** @endcond */
/** For colorized maintenance script output, is your terminal background dark ? */
$wgCommandLineDarkBg = false;
/**
* Array for extensions to register their maintenance scripts with the
* system. The key is the name of the class and the value is the full
* path to the file
*/
$wgMaintenanceScripts = array();
/**
* Set this to a string to put the wiki into read-only mode. The text will be
* used as an explanation to users.
*
* This prevents most write operations via the web interface. Cache updates may
* still be possible. To prevent database writes completely, use the read_only
* option in MySQL.
*/
$wgReadOnly = null;
/**
* If this lock file exists (size > 0), the wiki will be forced into read-only mode.
* Its contents will be shown to users as part of the read-only warning
* message.
*
* Will default to "{$wgUploadDirectory}/lock_yBgMBwiR" in Setup.php
*/
$wgReadOnlyFile = false;
/**
* When you run the web-based upgrade utility, it will tell you what to set
* this to in order to authorize the upgrade process. It will subsequently be
* used as a password, to authorize further upgrades.
*
* For security, do not set this to a guessable string. Use the value supplied
* by the install/upgrade process. To cause the upgrader to generate a new key,
* delete the old key from LocalSettings.php.
*/
$wgUpgradeKey = false;
/**
* Map GIT repository URLs to viewer URLs to provide links in Special:Version
*
* Key is a pattern passed to preg_match() and preg_replace(),
* without the delimiters (which are #) and must match the whole URL.
* The value is the replacement for the key (it can contain $1, etc.)
* %h will be replaced by the short SHA-1 (7 first chars) and %H by the
* full SHA-1 of the HEAD revision.
*
* @since 1.20
*/
$wgGitRepositoryViewers = array(
'https://gerrit.wikimedia.org/r/p/(.*)' => 'https://gerrit.wikimedia.org/r/gitweb?p=$1;h=%H',
'ssh://(?:[a-z0-9_]+@)?gerrit.wikimedia.org:29418/(.*)' => 'https://gerrit.wikimedia.org/r/gitweb?p=$1;h=%H',
);
/** @} */ # End of maintenance }
/************************************************************************//**
* @name Recent changes, new pages, watchlist and history
* @{
*/
/**
* Recentchanges items are periodically purged; entries older than this many
* seconds will go.
* Default: 13 weeks = about three months
*/
$wgRCMaxAge = 13 * 7 * 24 * 3600;
/**
* Filter $wgRCLinkDays by $wgRCMaxAge to avoid showing links for numbers
* higher than what will be stored. Note that this is disabled by default
* because we sometimes do have RC data which is beyond the limit for some
* reason, and some users may use the high numbers to display that data which
* is still there.
*/
$wgRCFilterByAge = false;
/**
* List of Days and Limits options to list in the Special:Recentchanges and
* Special:Recentchangeslinked pages.
*/
$wgRCLinkLimits = array( 50, 100, 250, 500 );
$wgRCLinkDays = array( 1, 3, 7, 14, 30 );
/**
* Send recent changes updates via UDP. The updates will be formatted for IRC.
* Set this to the IP address of the receiver.
*/
$wgRC2UDPAddress = false;
/**
* Port number for RC updates
*/
$wgRC2UDPPort = false;
/**
* Prefix to prepend to each UDP packet.
* This can be used to identify the wiki. A script is available called
* mxircecho.py which listens on a UDP port, and uses a prefix ending in a
* tab to identify the IRC channel to send the log line to.
*/
$wgRC2UDPPrefix = '';
/**
* If this is set to true, $wgLocalInterwiki will be prepended to links in the
* IRC feed. If this is set to a string, that string will be used as the prefix.
*/
$wgRC2UDPInterwikiPrefix = false;
/**
* Set to true to omit "bot" edits (by users with the bot permission) from the
* UDP feed.
*/
$wgRC2UDPOmitBots = false;
/**
* Enable user search in Special:Newpages
* This is really a temporary hack around an index install bug on some Wikipedias.
* Kill it once fixed.
*/
$wgEnableNewpagesUserFilter = true;
/** Use RC Patrolling to check for vandalism */
$wgUseRCPatrol = true;
/** Use new page patrolling to check new pages on Special:Newpages */
$wgUseNPPatrol = true;
/** Provide syndication feeds (RSS, Atom) for, e.g., Recentchanges, Newpages */
$wgFeed = true;
/** Set maximum number of results to return in syndication feeds (RSS, Atom) for
* eg Recentchanges, Newpages. */
$wgFeedLimit = 50;
/** _Minimum_ timeout for cached Recentchanges feed, in seconds.
* A cached version will continue to be served out even if changes
* are made, until this many seconds runs out since the last render.
*
* If set to 0, feed caching is disabled. Use this for debugging only;
* feed generation can be pretty slow with diffs.
*/
$wgFeedCacheTimeout = 60;
/** When generating Recentchanges RSS/Atom feed, diffs will not be generated for
* pages larger than this size. */
$wgFeedDiffCutoff = 32768;
/** Override the site's default RSS/ATOM feed for recentchanges that appears on
* every page. Some sites might have a different feed they'd like to promote
* instead of the RC feed (maybe like a "Recent New Articles" or "Breaking news" one).
* Should be a format as key (either 'rss' or 'atom') and an URL to the feed
* as value.
* @par Example:
* Configure the 'atom' feed to http://example.com/somefeed.xml
* @code
* $wgSiteFeed['atom'] = "http://example.com/somefeed.xml";
* @endcode
*/
$wgOverrideSiteFeed = array();
/**
* Available feeds objects.
* Should probably only be defined when a page is syndicated ie when
* $wgOut->isSyndicated() is true.
*/
$wgFeedClasses = array(
'rss' => 'RSSFeed',
'atom' => 'AtomFeed',
);
/**
* Which feed types should we provide by default? This can include 'rss',
* 'atom', neither, or both.
*/
$wgAdvertisedFeedTypes = array( 'atom' );
/** Show watching users in recent changes, watchlist and page history views */
$wgRCShowWatchingUsers = false; # UPO
/** Show watching users in Page views */
$wgPageShowWatchingUsers = false;
/** Show the amount of changed characters in recent changes */
$wgRCShowChangedSize = true;
/**
* If the difference between the character counts of the text
* before and after the edit is below that value, the value will be
* highlighted on the RC page.
*/
$wgRCChangedSizeThreshold = 500;
/**
* Show "Updated (since my last visit)" marker in RC view, watchlist and history
* view for watched pages with new changes */
$wgShowUpdatedMarker = true;
/**
* Disable links to talk pages of anonymous users (IPs) in listings on special
* pages like page history, Special:Recentchanges, etc.
*/
$wgDisableAnonTalk = false;
/**
* Enable filtering of categories in Recentchanges
*/
$wgAllowCategorizedRecentChanges = false;
/**
* Allow filtering by change tag in recentchanges, history, etc
* Has no effect if no tags are defined in valid_tag.
*/
$wgUseTagFilter = true;
/**
* If set to an integer, pages that are watched by this many users or more
* will not require the unwatchedpages permission to view the number of
* watchers.
*
* @since 1.21
*/
$wgUnwatchedPageThreshold = false;
/** @} */ # end RC/watchlist }
/************************************************************************//**
* @name Copyright and credits settings
* @{
*/
/**
* Override for copyright metadata.
*
* This is the name of the page containing information about the wiki's copyright status,
* which will be added as a link in the footer if it is specified. It overrides
* $wgRightsUrl if both are specified.
*/
$wgRightsPage = null;
/**
* Set this to specify an external URL containing details about the content license used on your wiki.
* If $wgRightsPage is set then this setting is ignored.
*/
$wgRightsUrl = null;
/**
* If either $wgRightsUrl or $wgRightsPage is specified then this variable gives the text for the link.
* If using $wgRightsUrl then this value must be specified. If using $wgRightsPage then the name of the
* page will also be used as the link if this variable is not set.
*/
$wgRightsText = null;
/**
* Override for copyright metadata.
*/
$wgRightsIcon = null;
/**
* Set to an array of metadata terms. Else they will be loaded based on $wgRightsUrl
*/
$wgLicenseTerms = false;
/**
* Set this to some HTML to override the rights icon with an arbitrary logo
* @deprecated since 1.18 Use $wgFooterIcons['copyright']['copyright']
*/
$wgCopyrightIcon = null;
/** Set this to true if you want detailed copyright information forms on Upload. */
$wgUseCopyrightUpload = false;
/**
* Set this to the number of authors that you want to be credited below an
* article text. Set it to zero to hide the attribution block, and a negative
* number (like -1) to show all authors. Note that this will require 2-3 extra
* database hits, which can have a not insignificant impact on performance for
* large wikis.
*/
$wgMaxCredits = 0;
/** If there are more than $wgMaxCredits authors, show $wgMaxCredits of them.
* Otherwise, link to a separate credits page. */
$wgShowCreditsIfMax = true;
/** @} */ # end of copyright and credits settings }
/************************************************************************//**
* @name Import / Export
* @{
*/
/**
* List of interwiki prefixes for wikis we'll accept as sources for
* Special:Import (for sysops). Since complete page history can be imported,
* these should be 'trusted'.
*
* If a user has the 'import' permission but not the 'importupload' permission,
* they will only be able to run imports through this transwiki interface.
*/
$wgImportSources = array();
/**
* Optional default target namespace for interwiki imports.
* Can use this to create an incoming "transwiki"-style queue.
* Set to numeric key, not the name.
*
* Users may override this in the Special:Import dialog.
*/
$wgImportTargetNamespace = null;
/**
* If set to false, disables the full-history option on Special:Export.
* This is currently poorly optimized for long edit histories, so is
* disabled on Wikimedia's sites.
*/
$wgExportAllowHistory = true;
/**
* If set nonzero, Special:Export requests for history of pages with
* more revisions than this will be rejected. On some big sites things
* could get bogged down by very very long pages.
*/
$wgExportMaxHistory = 0;
/**
* Return distinct author list (when not returning full history)
*/
$wgExportAllowListContributors = false;
/**
* If non-zero, Special:Export accepts a "pagelink-depth" parameter
* up to this specified level, which will cause it to include all
* pages linked to from the pages you specify. Since this number
* can become *insanely large* and could easily break your wiki,
* it's disabled by default for now.
*
* @warning There's a HARD CODED limit of 5 levels of recursion to prevent a
* crazy-big export from being done by someone setting the depth number too
* high. In other words, last resort safety net.
*/
$wgExportMaxLinkDepth = 0;
/**
* Whether to allow the "export all pages in namespace" option
*/
$wgExportFromNamespaces = false;
/**
* Whether to allow exporting the entire wiki into a single file
*/
$wgExportAllowAll = false;
/** @} */ # end of import/export }
/*************************************************************************//**
* @name Extensions
* @{
*/
/**
* A list of callback functions which are called once MediaWiki is fully
* initialised
*/
$wgExtensionFunctions = array();
/**
* Extension messages files.
*
* Associative array mapping extension name to the filename where messages can be
* found. The file should contain variable assignments. Any of the variables
* present in languages/messages/MessagesEn.php may be defined, but $messages
* is the most common.
*
* Variables defined in extensions will override conflicting variables defined
* in the core.
*
* @par Example:
* @code
* $wgExtensionMessagesFiles['ConfirmEdit'] = __DIR__.'/ConfirmEdit.i18n.php';
* @endcode
*/
$wgExtensionMessagesFiles = array();
/**
* Parser output hooks.
* This is an associative array where the key is an extension-defined tag
* (typically the extension name), and the value is a PHP callback.
* These will be called as an OutputPageParserOutput hook, if the relevant
* tag has been registered with the parser output object.
*
* Registration is done with $pout->addOutputHook( $tag, $data ).
*
* The callback has the form:
* @code
* function outputHook( $outputPage, $parserOutput, $data ) { ... }
* @endcode
*/
$wgParserOutputHooks = array();
/**
* List of valid skin names.
* The key should be the name in all lower case, the value should be a properly
* cased name for the skin. This value will be prefixed with "Skin" to create the
* class name of the skin to load, and if the skin's class cannot be found through
* the autoloader it will be used to load a .php file by that name in the skins directory.
* The default skins will be added later, by Skin::getSkinNames(). Use
* Skin::getSkinNames() as an accessor if you wish to have access to the full list.
*/
$wgValidSkinNames = array();
/**
* Special page list.
* See the top of SpecialPage.php for documentation.
*/
$wgSpecialPages = array();
/**
* Array mapping class names to filenames, for autoloading.
*/
$wgAutoloadClasses = array();
/**
* An array of extension types and inside that their names, versions, authors,
* urls, descriptions and pointers to localized description msgs. Note that
* the version, url, description and descriptionmsg key can be omitted.
*
* @code
* $wgExtensionCredits[$type][] = array(
* 'name' => 'Example extension',
* 'version' => 1.9,
* 'path' => __FILE__,
* 'author' => 'Foo Barstein',
* 'url' => 'http://www.example.com/Example%20Extension/',
* 'description' => 'An example extension',
* 'descriptionmsg' => 'exampleextension-desc',
* );
* @endcode
*
* Where $type is 'specialpage', 'parserhook', 'variable', 'media' or 'other'.
* Where 'descriptionmsg' can be an array with message key and parameters:
* 'descriptionmsg' => array( 'exampleextension-desc', param1, param2, ... ),
*
* author can be a string or an array of strings. Authors can be linked using
* the regular wikitext link syntax. To have an internationalized version of
* "and others" show, add an element "...". This element can also be linked,
* for instance "[http://example ...]".
*/
$wgExtensionCredits = array();
/**
* Authentication plugin.
* @var $wgAuth AuthPlugin
*/
$wgAuth = null;
/**
* Global list of hooks.
*
* The key is one of the events made available by MediaWiki, you can find
* a description for most of them in docs/hooks.txt. The array is used
* internally by Hook:run().
*
* The value can be one of:
*
* - A function name:
* @code
* $wgHooks['event_name'][] = $function;
* @endcode
* - A function with some data:
* @code
* $wgHooks['event_name'][] = array($function, $data);
* @endcode
* - A an object method:
* @code
* $wgHooks['event_name'][] = array($object, 'method');
* @endcode
*
* @warning You should always append to an event array or you will end up
* deleting a previous registered hook.
*
* @todo Does it support PHP closures?
*/
$wgHooks = array();
/**
* Maps jobs to their handling classes; extensions
* can add to this to provide custom jobs
*/
$wgJobClasses = array(
'refreshLinks' => 'RefreshLinksJob',
'refreshLinks2' => 'RefreshLinksJob2',
'htmlCacheUpdate' => 'HTMLCacheUpdateJob',
'html_cache_update' => 'HTMLCacheUpdateJob', // backwards-compatible
'sendMail' => 'EmaillingJob',
'enotifNotify' => 'EnotifNotifyJob',
'fixDoubleRedirect' => 'DoubleRedirectJob',
'uploadFromUrl' => 'UploadFromUrlJob',
'AssembleUploadChunks' => 'AssembleUploadChunksJob',
'PublishStashedFile' => 'PublishStashedFileJob',
'null' => 'NullJob'
);
/**
* Jobs that must be explicitly requested, i.e. aren't run by job runners unless
* special flags are set. The values here are keys of $wgJobClasses.
*
* These can be:
* - Very long-running jobs.
* - Jobs that you would never want to run as part of a page rendering request.
* - Jobs that you want to run on specialized machines ( like transcoding, or a particular
* machine on your cluster has 'outside' web access you could restrict uploadFromUrl )
*/
$wgJobTypesExcludedFromDefaultQueue = array( 'AssembleUploadChunks', 'PublishStashedFile' );
/**
* Map of job types to configuration arrays.
* This determines which queue class and storage system is used for each job type.
* Job types that do not have explicit configuration will use the 'default' config.
* These settings should be global to all wikis.
*/
$wgJobTypeConf = array(
'default' => array( 'class' => 'JobQueueDB', 'order' => 'random' ),
);
/**
* Which aggregator to use for tracking which queues have jobs.
* These settings should be global to all wikis.
*/
$wgJobQueueAggregator = array(
'class' => 'JobQueueAggregatorMemc'
);
/**
* Additional functions to be performed with updateSpecialPages.
* Expensive Querypages are already updated.
*/
$wgSpecialPageCacheUpdates = array(
'Statistics' => array( 'SiteStatsUpdate', 'cacheUpdate' )
);
/**
* Hooks that are used for outputting exceptions. Format is:
* $wgExceptionHooks[] = $funcname
* or:
* $wgExceptionHooks[] = array( $class, $funcname )
* Hooks should return strings or false
*/
$wgExceptionHooks = array();
/**
* Page property link table invalidation lists. When a page property
* changes, this may require other link tables to be updated (eg
* adding __HIDDENCAT__ means the hiddencat tracking category will
* have been added, so the categorylinks table needs to be rebuilt).
* This array can be added to by extensions.
*/
$wgPagePropLinkInvalidations = array(
'hiddencat' => 'categorylinks',
);
/** @} */ # End extensions }
/*************************************************************************//**
* @name Categories
* @{
*/
/**
* Use experimental, DMOZ-like category browser
*/
$wgUseCategoryBrowser = false;
/**
* On category pages, show thumbnail gallery for images belonging to that
* category instead of listing them as articles.
*/
$wgCategoryMagicGallery = true;
/**
* Paging limit for categories
*/
$wgCategoryPagingLimit = 200;
/**
* Specify how category names should be sorted, when listed on a category page.
* A sorting scheme is also known as a collation.
*
* Available values are:
*
* - uppercase: Converts the category name to upper case, and sorts by that.
*
* - identity: Does no conversion. Sorts by binary value of the string.
*
* - uca-default: Provides access to the Unicode Collation Algorithm with
* the default element table. This is a compromise collation which sorts
* all languages in a mediocre way. However, it is better than "uppercase".
*
* To use the uca-default collation, you must have PHP's intl extension
* installed. See http://php.net/manual/en/intl.setup.php . The details of the
* resulting collation will depend on the version of ICU installed on the
* server.
*
* After you change this, you must run maintenance/updateCollation.php to fix
* the sort keys in the database.
*
* Extensions can define there own collations by subclassing Collation
* and using the Collation::factory hook.
*/
$wgCategoryCollation = 'uppercase';
/** @} */ # End categories }
/*************************************************************************//**
* @name Logging
* @{
*/
/**
* The logging system has two levels: an event type, which describes the
* general category and can be viewed as a named subset of all logs; and
* an action, which is a specific kind of event that can exist in that
* log type.
*/
$wgLogTypes = array(
'',
'block',
'protect',
'rights',
'delete',
'upload',
'move',
'import',
'patrol',
'merge',
'suppress',
);
/**
* This restricts log access to those who have a certain right
* Users without this will not see it in the option menu and can not view it
* Restricted logs are not added to recent changes
* Logs should remain non-transcludable
* Format: logtype => permissiontype
*/
$wgLogRestrictions = array(
'suppress' => 'suppressionlog'
);
/**
* Show/hide links on Special:Log will be shown for these log types.
*
* This is associative array of log type => boolean "hide by default"
*
* See $wgLogTypes for a list of available log types.
*
* @par Example:
* @code
* $wgFilterLogTypes = array(
* 'move' => true,
* 'import' => false,
* );
* @endcode
*
* Will display show/hide links for the move and import logs. Move logs will be
* hidden by default unless the link is clicked. Import logs will be shown by
* default, and hidden when the link is clicked.
*
* A message of the form log-show-hide-[type] should be added, and will be used
* for the link text.
*/
$wgFilterLogTypes = array(
'patrol' => true
);
/**
* Lists the message key string for each log type. The localized messages
* will be listed in the user interface.
*
* Extensions with custom log types may add to this array.
*
* @since 1.19, if you follow the naming convention log-name-TYPE,
* where TYPE is your log type, yoy don't need to use this array.
*/
$wgLogNames = array(
'' => 'all-logs-page',
'block' => 'blocklogpage',
'protect' => 'protectlogpage',
'rights' => 'rightslog',
'delete' => 'dellogpage',
'upload' => 'uploadlogpage',
'move' => 'movelogpage',
'import' => 'importlogpage',
'patrol' => 'patrol-log-page',
'merge' => 'mergelog',
'suppress' => 'suppressionlog',
);
/**
* Lists the message key string for descriptive text to be shown at the
* top of each log type.
*
* Extensions with custom log types may add to this array.
*
* @since 1.19, if you follow the naming convention log-description-TYPE,
* where TYPE is your log type, yoy don't need to use this array.
*/
$wgLogHeaders = array(
'' => 'alllogstext',
'block' => 'blocklogtext',
'protect' => 'protectlogtext',
'rights' => 'rightslogtext',
'delete' => 'dellogpagetext',
'upload' => 'uploadlogpagetext',
'move' => 'movelogpagetext',
'import' => 'importlogpagetext',
'patrol' => 'patrol-log-header',
'merge' => 'mergelogpagetext',
'suppress' => 'suppressionlogtext',
);
/**
* Lists the message key string for formatting individual events of each
* type and action when listed in the logs.
*
* Extensions with custom log types may add to this array.
*/
$wgLogActions = array(
'block/block' => 'blocklogentry',
'block/unblock' => 'unblocklogentry',
'block/reblock' => 'reblock-logentry',
'protect/protect' => 'protectedarticle',
'protect/modify' => 'modifiedarticleprotection',
'protect/unprotect' => 'unprotectedarticle',
'protect/move_prot' => 'movedarticleprotection',
'upload/upload' => 'uploadedimage',
'upload/overwrite' => 'overwroteimage',
'upload/revert' => 'uploadedimage',
'import/upload' => 'import-logentry-upload',
'import/interwiki' => 'import-logentry-interwiki',
'merge/merge' => 'pagemerge-logentry',
'suppress/block' => 'blocklogentry',
'suppress/reblock' => 'reblock-logentry',
);
/**
* The same as above, but here values are names of functions,
* not messages.
* @see LogPage::actionText
* @see LogFormatter
*/
$wgLogActionsHandlers = array(
'move/move' => 'MoveLogFormatter',
'move/move_redir' => 'MoveLogFormatter',
'delete/delete' => 'DeleteLogFormatter',
'delete/restore' => 'DeleteLogFormatter',
'delete/revision' => 'DeleteLogFormatter',
'delete/event' => 'DeleteLogFormatter',
'suppress/revision' => 'DeleteLogFormatter',
'suppress/event' => 'DeleteLogFormatter',
'suppress/delete' => 'DeleteLogFormatter',
'patrol/patrol' => 'PatrolLogFormatter',
'rights/rights' => 'RightsLogFormatter',
'rights/autopromote' => 'RightsLogFormatter',
);
/**
* Maintain a log of newusers at Log/newusers?
*/
$wgNewUserLog = true;
/** @} */ # end logging }
/*************************************************************************//**
* @name Special pages (general and miscellaneous)
* @{
*/
/**
* Allow special page inclusions such as {{Special:Allpages}}
*/
$wgAllowSpecialInclusion = true;
/**
* Set this to an array of special page names to prevent
* maintenance/updateSpecialPages.php from updating those pages.
*/
$wgDisableQueryPageUpdate = false;
/**
* List of special pages, followed by what subtitle they should go under
* at Special:SpecialPages
*
* @deprecated 1.21 Override SpecialPage::getGroupName instead
*/
$wgSpecialPageGroups = array();
/** Whether or not to sort special pages in Special:Specialpages */
$wgSortSpecialPages = true;
/**
* On Special:Unusedimages, consider images "used", if they are put
* into a category. Default (false) is not to count those as used.
*/
$wgCountCategorizedImagesAsUsed = false;
/**
* Maximum number of links to a redirect page listed on
* Special:Whatlinkshere/RedirectDestination
*/
$wgMaxRedirectLinksRetrieved = 500;
/** @} */ # end special pages }
/*************************************************************************//**
* @name Actions
* @{
*/
/**
* Array of allowed values for the "title=foo&action=<action>" parameter. Syntax is:
* 'foo' => 'ClassName' Load the specified class which subclasses Action
* 'foo' => true Load the class FooAction which subclasses Action
* If something is specified in the getActionOverrides()
* of the relevant Page object it will be used
* instead of the default class.
* 'foo' => false The action is disabled; show an error message
* Unsetting core actions will probably cause things to complain loudly.
*/
$wgActions = array(
'credits' => true,
'delete' => true,
'edit' => true,
'history' => true,
'info' => true,
'markpatrolled' => true,
'protect' => true,
'purge' => true,
'raw' => true,
'render' => true,
'revert' => true,
'revisiondelete' => true,
'rollback' => true,
'submit' => true,
'unprotect' => true,
'unwatch' => true,
'view' => true,
'watch' => true,
);
/**
* Array of disabled article actions, e.g. view, edit, delete, etc.
* @deprecated since 1.18; just set $wgActions['action'] = false instead
*/
$wgDisabledActions = array();
/** @} */ # end actions }
/*************************************************************************//**
* @name Robot (search engine crawler) policy
* See also $wgNoFollowLinks.
* @{
*/
/**
* Default robot policy. The default policy is to encourage indexing and fol-
* lowing of links. It may be overridden on a per-namespace and/or per-page
* basis.
*/
$wgDefaultRobotPolicy = 'index,follow';
/**
* Robot policies per namespaces. The default policy is given above, the array
* is made of namespace constants as defined in includes/Defines.php. You can-
* not specify a different default policy for NS_SPECIAL: it is always noindex,
* nofollow. This is because a number of special pages (e.g., ListPages) have
* many permutations of options that display the same data under redundant
* URLs, so search engine spiders risk getting lost in a maze of twisty special
* pages, all alike, and never reaching your actual content.
*
* @par Example:
* @code
* $wgNamespaceRobotPolicies = array( NS_TALK => 'noindex' );
* @endcode
*/
$wgNamespaceRobotPolicies = array();
/**
* Robot policies per article. These override the per-namespace robot policies.
* Must be in the form of an array where the key part is a properly canonicalised
* text form title and the value is a robot policy.
*
* @par Example:
* @code
* $wgArticleRobotPolicies = array(
* 'Main Page' => 'noindex,follow',
* 'User:Bob' => 'index,follow',
* );
* @endcode
*
* @par Example that DOES NOT WORK because the names are not canonical text
* forms:
* @code
* $wgArticleRobotPolicies = array(
* # Underscore, not space!
* 'Main_Page' => 'noindex,follow',
* # "Project", not the actual project name!
* 'Project:X' => 'index,follow',
* # Needs to be "Abc", not "abc" (unless $wgCapitalLinks is false for that namespace)!
* 'abc' => 'noindex,nofollow'
* );
* @endcode
*/
$wgArticleRobotPolicies = array();
/**
* An array of namespace keys in which the __INDEX__/__NOINDEX__ magic words
* will not function, so users can't decide whether pages in that namespace are
* indexed by search engines. If set to null, default to $wgContentNamespaces.
*
* @par Example:
* @code
* $wgExemptFromUserRobotsControl = array( NS_MAIN, NS_TALK, NS_PROJECT );
* @endcode
*/
$wgExemptFromUserRobotsControl = null;
/** @} */ # End robot policy }
/************************************************************************//**
* @name AJAX and API
* Note: The AJAX entry point which this section refers to is gradually being
* replaced by the API entry point, api.php. They are essentially equivalent.
* Both of them are used for dynamic client-side features, via XHR.
* @{
*/
/**
* Enable the MediaWiki API for convenient access to
* machine-readable data via api.php
*
* See http://www.mediawiki.org/wiki/API
*/
$wgEnableAPI = true;
/**
* Allow the API to be used to perform write operations
* (page edits, rollback, etc.) when an authorised user
* accesses it
*/
$wgEnableWriteAPI = true;
/**
*
* WARNING: SECURITY THREAT - debug use only
*
* Disables many security checks in the API for debugging purposes.
* This flag should never be used on the production servers, as it introduces
* a number of potential security holes. Even when enabled, the validation
* will still be performed, but instead of failing, API will return a warning.
* Also, there will always be a warning notifying that this flag is set.
* At this point, the flag allows GET requests to go through for modules
* requiring POST.
*
* @since 1.21
*/
$wgDebugAPI = false;
/**
* API module extensions.
* Associative array mapping module name to class name.
* Extension modules may override the core modules.
* @todo Describe each of the variables, group them and add examples
*/
$wgAPIModules = array();
$wgAPIMetaModules = array();
$wgAPIPropModules = array();
$wgAPIListModules = array();
/**
* This variable is ignored. To add your module to the API, please add it to $wgAPI*Modules
* @deprecated since 1.21
*/
$wgAPIGeneratorModules = array();
/**
* Maximum amount of rows to scan in a DB query in the API
* The default value is generally fine
*/
$wgAPIMaxDBRows = 5000;
/**
* The maximum size (in bytes) of an API result.
* @warning Do not set this lower than $wgMaxArticleSize*1024
*/
$wgAPIMaxResultSize = 8388608;
/**
* The maximum number of uncached diffs that can be retrieved in one API
* request. Set this to 0 to disable API diffs altogether
*/
$wgAPIMaxUncachedDiffs = 1;
/**
* Log file or URL (TCP or UDP) to log API requests to, or false to disable
* API request logging
*/
$wgAPIRequestLog = false;
/**
* Set the timeout for the API help text cache. If set to 0, caching disabled
*/
$wgAPICacheHelpTimeout = 60 * 60;
/**
* Enable AJAX framework
*/
$wgUseAjax = true;
/**
* List of Ajax-callable functions.
* Extensions acting as Ajax callbacks must register here
*/
$wgAjaxExportList = array();
/**
* Enable watching/unwatching pages using AJAX.
* Requires $wgUseAjax to be true too.
*/
$wgAjaxWatch = true;
/**
* Enable AJAX check for file overwrite, pre-upload
*/
$wgAjaxUploadDestCheck = true;
/**
* Enable previewing licences via AJAX. Also requires $wgEnableAPI to be true.
*/
$wgAjaxLicensePreview = true;
/**
* Settings for incoming cross-site AJAX requests:
* Newer browsers support cross-site AJAX when the target resource allows requests
* from the origin domain by the Access-Control-Allow-Origin header.
* This is currently only used by the API (requests to api.php)
* $wgCrossSiteAJAXdomains can be set using a wildcard syntax:
*
* - '*' matches any number of characters
* - '?' matches any 1 character
*
* @par Example:
* @code
* $wgCrossSiteAJAXdomains = array(
* 'www.mediawiki.org',
* '*.wikipedia.org',
* '*.wikimedia.org',
* '*.wiktionary.org',
* );
* @endcode
*/
$wgCrossSiteAJAXdomains = array();
/**
* Domains that should not be allowed to make AJAX requests,
* even if they match one of the domains allowed by $wgCrossSiteAJAXdomains
* Uses the same syntax as $wgCrossSiteAJAXdomains
*/
$wgCrossSiteAJAXdomainExceptions = array();
/** @} */ # End AJAX and API }
/************************************************************************//**
* @name Shell and process control
* @{
*/
/**
* Maximum amount of virtual memory available to shell processes under linux, in KB.
*/
$wgMaxShellMemory = 102400;
/**
* Maximum file size created by shell processes under linux, in KB
* ImageMagick convert for example can be fairly hungry for scratch space
*/
$wgMaxShellFileSize = 102400;
/**
* Maximum CPU time in seconds for shell processes under Linux
*/
$wgMaxShellTime = 180;
/**
* Maximum wall clock time (i.e. real time, of the kind the clock on the wall
* would measure) in seconds for shell processes under Linux
*/
$wgMaxShellWallClockTime = 180;
/**
* Under Linux: a cgroup directory used to constrain memory usage of shell
* commands. The directory must be writable by the user which runs MediaWiki.
*
* If specified, this is used instead of ulimit, which is inaccurate, and
* causes malloc() to return NULL, which exposes bugs in C applications, making
* them segfault or deadlock.
*
* A wrapper script will create a cgroup for each shell command that runs, as
* a subgroup of the specified cgroup. If the memory limit is exceeded, the
* kernel will send a SIGKILL signal to a process in the subgroup.
*
* @par Example:
* @code
* mkdir -p /sys/fs/cgroup/memory/mediawiki
* mkdir -m 0777 /sys/fs/cgroup/memory/mediawiki/job
* echo '$wgShellCgroup = "/sys/fs/cgroup/memory/mediawiki/job";' >> LocalSettings.php
* @endcode
*
* The reliability of cgroup cleanup can be improved by installing a
* notify_on_release script in the root cgroup, see e.g.
* https://gerrit.wikimedia.org/r/#/c/40784
*/
$wgShellCgroup = false;
/**
* Executable path of the PHP cli binary (php/php5). Should be set up on install.
*/
$wgPhpCli = '/usr/bin/php';
/**
* Locale for LC_CTYPE, to work around http://bugs.php.net/bug.php?id=45132
* For Unix-like operating systems, set this to to a locale that has a UTF-8
* character set. Only the character set is relevant.
*/
$wgShellLocale = 'en_US.utf8';
/** @} */ # End shell }
/************************************************************************//**
* @name HTTP client
* @{
*/
/**
* Timeout for HTTP requests done internally
*/
$wgHTTPTimeout = 25;
/**
* Timeout for Asynchronous (background) HTTP requests
*/
$wgAsyncHTTPTimeout = 25;
/**
* Proxy to use for CURL requests.
*/
$wgHTTPProxy = false;
/** @} */ # End HTTP client }
/************************************************************************//**
* @name Job queue
* See also $wgEnotifUseJobQ.
* @{
*/
/**
* Number of jobs to perform per request. May be less than one in which case
* jobs are performed probabalistically. If this is zero, jobs will not be done
* during ordinary apache requests. In this case, maintenance/runJobs.php should
* be run periodically.
*/
$wgJobRunRate = 1;
/**
* Number of rows to update per job
*/
$wgUpdateRowsPerJob = 500;
/**
* Number of rows to update per query
*/
$wgUpdateRowsPerQuery = 100;
/**
* Do not purge all the pages that use a page when it is edited
* if there are more than this many such pages. This is used to
* avoid invalidating a large portion of the squid/parser cache.
*
* This setting should factor in any squid/parser cache expiry settings.
*/
$wgMaxBacklinksInvalidate = false;
/** @} */ # End job queue }
/************************************************************************//**
* @name HipHop compilation
* @{
*/
/**
* The build directory for HipHop compilation.
* Defaults to '$IP/maintenance/hiphop/build'.
*/
$wgHipHopBuildDirectory = false;
/**
* The HipHop build type. Can be either "Debug" or "Release".
*/
$wgHipHopBuildType = 'Debug';
/**
* Number of parallel processes to use during HipHop compilation, or "detect"
* to guess from system properties.
*/
$wgHipHopCompilerProcs = 'detect';
/**
* Filesystem extensions directory. Defaults to $IP/../extensions.
*
* To compile extensions with HipHop, set $wgExtensionsDirectory correctly,
* and use code like:
* @code
* require( MWInit::extensionSetupPath( 'Extension/Extension.php' ) );
* @endcode
*
* to include the extension setup file from LocalSettings.php. It is not
* necessary to set this variable unless you use MWInit::extensionSetupPath().
*/
$wgExtensionsDirectory = false;
/**
* A list of files that should be compiled into a HipHop build, in addition to
* those listed in $wgAutoloadClasses. Add to this array in an extension setup
* file in order to add files to the build.
*
* The files listed here must either be either absolute paths under $IP or
* under $wgExtensionsDirectory, or paths relative to the virtual source root
* "$IP/..", i.e. starting with "phase3" for core files, and "extensions" for
* extension files.
*/
$wgCompiledFiles = array();
/** @} */ # End of HipHop compilation }
/************************************************************************//**
* @name Miscellaneous
* @{
*/
/** Name of the external diff engine to use */
$wgExternalDiffEngine = false;
/**
* Disable redirects to special pages and interwiki redirects, which use a 302
* and have no "redirected from" link.
*
* @note This is only for articles with #REDIRECT in them. URL's containing a
* local interwiki prefix (or a non-canonical special page name) are still hard
* redirected regardless of this setting.
*/
$wgDisableHardRedirects = false;
/**
* LinkHolderArray batch size
* For debugging
*/
$wgLinkHolderBatchSize = 1000;
/**
* By default MediaWiki does not register links pointing to same server in
* externallinks dataset, use this value to override:
*/
$wgRegisterInternalExternals = false;
/**
* Maximum number of pages to move at once when moving subpages with a page.
*/
$wgMaximumMovedPages = 100;
/**
* Fix double redirects after a page move.
* Tends to conflict with page move vandalism, use only on a private wiki.
*/
$wgFixDoubleRedirects = false;
/**
* Allow redirection to another page when a user logs in.
* To enable, set to a string like 'Main Page'
*/
$wgRedirectOnLogin = null;
/**
* Configuration for processing pool control, for use in high-traffic wikis.
* An implementation is provided in the PoolCounter extension.
*
* This configuration array maps pool types to an associative array. The only
* defined key in the associative array is "class", which gives the class name.
* The remaining elements are passed through to the class as constructor
* parameters.
*
* @par Example:
* @code
* $wgPoolCounterConf = array( 'ArticleView' => array(
* 'class' => 'PoolCounter_Client',
* 'timeout' => 15, // wait timeout in seconds
* 'workers' => 5, // maximum number of active threads in each pool
* 'maxqueue' => 50, // maximum number of total threads in each pool
* ... any extension-specific options...
* );
* @endcode
*/
$wgPoolCounterConf = null;
/**
* To disable file delete/restore temporarily
*/
$wgUploadMaintenance = false;
/**
* Allows running of selenium tests via maintenance/tests/RunSeleniumTests.php
*/
$wgEnableSelenium = false;
$wgSeleniumTestConfigs = array();
$wgSeleniumConfigFile = null;
$wgDBtestuser = ''; //db user that has permission to create and drop the test databases only
$wgDBtestpassword = '';
/**
* Associative array mapping namespace IDs to the name of the content model pages in that namespace should have by
* default (use the CONTENT_MODEL_XXX constants). If no special content type is defined for a given namespace,
* pages in that namespace will use the CONTENT_MODEL_WIKITEXT (except for the special case of JS and CS pages).
*
* @since 1.21
*/
$wgNamespaceContentModels = array();
/**
* How to react if a plain text version of a non-text Content object is requested using ContentHandler::getContentText():
*
* * 'ignore': return null
* * 'fail': throw an MWException
* * 'serialize': serialize to default format
*
* @since 1.21
*/
$wgContentHandlerTextFallback = 'ignore';
/**
* Set to false to disable use of the database fields introduced by the ContentHandler facility.
* This way, the ContentHandler facility can be used without any additional information in the database.
* A page's content model is then derived solely from the page's title. This however means that changing
* a page's default model (e.g. using $wgNamespaceContentModels) will break the page and/or make the content
* inaccessible. This also means that pages can not be moved to a title that would default to a different
* content model.
*
* Overall, with $wgContentHandlerUseDB = false, no database updates are needed, but content handling
* is less robust and less flexible.
*
* @since 1.21
*/
$wgContentHandlerUseDB = true;
/**
* Determines which types of text are parsed as wikitext. This does not imply that these kinds
* of texts are also rendered as wikitext, it only means that links, magic words, etc will have
* the effect on the database they would have on a wikitext page.
*
* @todo: On the long run, it would be nice to put categories etc into a separate structure,
* or at least parse only the contents of comments in the scripts.
*
* @since 1.21
*/
$wgTextModelsToParse = array(
CONTENT_MODEL_WIKITEXT, // Just for completeness, wikitext will always be parsed.
CONTENT_MODEL_JAVASCRIPT, // Make categories etc work, people put them into comments.
CONTENT_MODEL_CSS, // Make categories etc work, people put them into comments.
);
/**
* Whether the user must enter their password to change their e-mail address
*
* @since 1.20
*/
$wgRequirePasswordforEmailChange = true;
/**
* Register handlers for specific types of sites.
*
* @since 1.20
*/
$wgSiteTypes = array(
'mediawiki' => 'MediaWikiSite',
);
/**
* For really cool vim folding this needs to be at the end:
* vim: foldmarker=@{,@} foldmethod=marker
* @}
*/